Personal Care, Safety & Security
Alcoscan Entrance Breathalyser System EBS010 – INSTALLED
Alcoscan EBS010 is a high speed automatic industrial breathalyser that is used to check the breath of workers for alcohol at Turn Stile gates and Entrances to sites, offices, mines, refineries and warehouses.
Result outputs are provided by a 12V 1 sec pulse separate for Pass and Fail and by digital USB output in PC mode.
If Dry Contact Relay OUTPUT for Pass and Fail is required an optional extra Relay Box is available.
A Pass result allows access and a Fail result prevents access. Breath tests are ethanol specific and EBS010 performs over 600 tests per hour. Alcoscan EBS010 is built for Industrial and High Security environments.
Annual calibration is recommended.
This is the Installed Option.
Specifications
Annual calibration is recommended.
| Category | Contents |
| Indication of B.A.C | 1) Pass is below 0.01% B.A.C. Fail can be set to fail from 0.01% B.A.C and up |
| Accuracy | +/-0.005%BAC at 0.100%BAC |
| Mouth piece | No Mouthpiece required |
| Sensor | Replaceable fuel cell type alcohol sensor |
| Power supply | 12VDC 1.5A power supply required – Supplied Standard |
| Weight | 550g |
| Dimension (mm) | 205 (height) X 108 (width) X 95 |
| Remarks | – Auto power off – Air flow rate checking for no blows – Calibrated to fail from 0.01% B.A.C to prevent access at the lowest possible BrAC levels – Pricing excludes travel expenses to and from Sites – This pricing includes Installation in Series with a Turnstile Gate or Mag-Locking Gate and not full integration into a Time-Keeping System |
₵9,800.00
Vendor Information
- Store Name: Alcohol Breathalysers
- Vendor: Alcohol-Breathalysers
- Address: P.o box 13095
Accra
Great Accra Region - No ratings found yet!
- Personal Care, Safety & Security
Alcoscan ALC-1
Alcoscan ALC-1 is a high-end Personal, Workplace or
Law-Enforcement alcohol tester with a fast reacting Fuel Cell Alcohol
Sensor used to check breath alcohol concentration quickly and
accurately.
It offers the highest accuracy levels available for portable alcohol testers with a long calibration cycle.ALC-1 is suitable for use in the workplace or on the roads as a screener.
Annual calibration is recommended.
Specifications
Annual calibration is recommended.
Category Contents Indication of B.A.C 1) Normal Mode: 0.00 to 0.40% B.A.C. or mg/l equivalent by LED display td> Accuracy +/-0.005%BAC at 0.100%BAC Mouth piece 5 supplied with unit and additional mouthpieces available Sensor Fuel Cell Type Alcohol Sensor Power supply Two 1.5V “AAA” Alkaline batteries – Two Supplied with unit Weight 115g (Including batteries) Dimension (mm) 124 (height) X 56 (width) X 41 Remarks Auto power off
– Battery Low indication
– CE, FDA approval
– Air flow rate checkingWE RECOMMEND THAT YOU ADD A PACK OF 100 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT
SKU: n/a - Personal Care, Safety & Security
Alcoscan AL5500 Personal Breathalyser
Alcoscan AL5500 is a very easy to use, reliable and
re-usable hand held personal breathalyser. It uses microcomputer control
with a 3 digit LCD display and audio cues.
The last test result and cumulative test count will be displayed when you hold the power switch down before performing a test.
The unit requires mouthpieces or drinking straws for correct operation.
This unit is suitable for personal use and not to test employees.
Annual calibration is recommended.
Specifications
Category Contents Indication of B.A.C 0.00 to 0.40% B.A.C. or mg/l equivalent by LED display Warming up Below 30 Seconds Response time Within 2 Seconds Mouth piece Yes required. (5 supplied standard). Plastic Drinking Straws can be used. Sensor Semiconductor type alcohol sensor Continuous usage Over 2 hours without battery change Power supply Two 1.5V “AA” Alkaline batteries Weight 89g (Including batteries) Dimension (mm) 110 X 46 X 20 Remarks – Auto power off
– Audible Alerts
– Battery Low indication
– Air Flow Rate Checking for correct breath sample
– Secret, sleek and simple design
– CESKU: n/a - Safety & Security
Alcoscan Entrance Breathalyser System EBS010 Sensor Modules
AEntrance Breathalyser System (EBS010) Spare Sensor Modules for quick exchange and replacement of sensors on site without the requirement for immediately servicing and calibration.
Saves times and means that EBS010 never has to leave your site when calibration of the sensor is required.
Always order a spare sensor module when ordering an EBS010 so that you never have any down-time.
SKU: n/a - Personal Care, Safety & Security
Alcoscan ALP-1 for Industry and Law-Enforcement
Alcoscan ALP-1 is a fully portable IP54 rated water resistant Fuel Cell Sensor breathalyser for Law-Enforcement and Industry alcohol screening.ALP-1 meets the EN Standard – EN 15964:2011 for Breath Alcohol test devices other than single use devices.ALP-1 captures and stores alcohol test results after each test which can be downloaded and analysed later on a PC.Alcoscan ALP-1 contains the latest 1-Inch full size Fuel Cell Sensor providing the highest accuracy available and ethanol specific results and providing for a long calibration cycle.
Provides both FAST no mouthpiece testing and NORMAL mouthpiece testing.
Memory: Password protected last 500 test results including date and time of each test.This unit is suitable for Industry and Law Enforcement screening.
Annual Calibration is recommended.
Specifications
Annual calibration is recommended.
Category Contents Indication of B.A.C 0.000 to 4.000% or 0.000 to 0.400%BAC or 0.00 to 2.50 Mg/l BrAC by LCD display Accuracy +/-0.005%BAC at 0.100%BAC Mouth piece 5 full mouthpieces supplied with unit and additional mouthpieces available; 1 blow cup supplied with unit Sensor Full Size 1-Inch fully replaceable Electro-chemical Fuel Cell Sensor – Ethanol Specific Power supply Two 1.5V “AA” Alkaline batteries Weight 198g (Including batteries) – breathalyser only Dimension (mm) 133 (height) X 64 (width) X 33 Remarks Auto power off
– Includes PC Software, USB Cable contained in a secure plastic carry case
– Battery Low indication
– Meets EN Standard – EN 15964:2011
– Air flow rate checking in case of low breath volume
– Annual Calibration Reminder
– Certified Water resistant to IP54 rating IEC 60529:2001
– PASS/FAIL Fast testing set to provide a Fail result from 0.01% B.A.CWE RECOMMEND THAT YOU ADD A PACK OF 100 ALP-1 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT
SKU: n/a
Related products
- Personal Care, Safety & Security
Alcoscan ALP-1 for Industry and Law-Enforcement BT
Alcoscan ALP-1 BT is a fully portable IP54 rated water resistant Fuel Cell Sensor breathalyser for Law-Enforcement and Industry alcohol screening.
ALP-1 meets the EN Standard – EN 15964:2011 for Breath Alcohol test devices other than single use devices.
ALP-1 captures and stores alcohol test results after each test which can be downloaded and analysed later on a PC.
Alcoscan ALP-1 contains the latest 1-Inch full size Fuel Cell Sensor providing the highest accuracy available and ethanol specific results and providing for a long calibration cycle.
Provides both FAST no mouthpiece testing and NORMAL mouthpiece testing.
Memory: Password protected last 500 test results including date and time of each test.
This unit is suitable for Industry and Law Enforcement screening.
Annual Calibration is recommended.
Specifications
Annual calibration is recommended.
Category Contents Indication of B.A.C 0.000 to 4.000% or 0.000 to 0.400%BAC or 0.00 to 2.50 Mg/l BrAC by LCD display td> Accuracy +/-0.005%BAC at 0.100%BAC Mouth piece 5 full mouthpieces supplied with unit and additional mouthpieces available; 1 blow cup supplied with unit Sensor Full Size 1-Inch fully replaceable Electro-chemical Fuel Cell Sensor – Ethanol Specific Power supply Two 1.5V “AA” Alkaline batteries Weight 198g (Including batteries) – breathalyser only Dimension (mm) 133 (height) X 64 (width) X 33 Remarks Auto power off
– Includes PC Software, USB Cable contained in a secure plastic carry case
– Battery Low indication
– Meets EN Standard – EN 15964:2011
– Air flow rate checking in case of low breath volume
– Annual Calibration Reminder
– Certified Water resistant to IP54 rating IEC 60529:2001
– PASS/FAIL Fast testing set to provide a Fail result from 0.01% B.A.CWE RECOMMEND THAT YOU ADD A PACK OF 100 ALP-1 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT
SKU: n/a - Personal Care, Safety & Security
Alcoscan ALP-1 incl Printer for Industry and Law-Enforcement
Alcoscan ALP-1 is a fully portable IP54 rated water resistant Fuel Cell Sensor Industry and Law-Enforcement screener.
ALP-1 meets the EN Standard – EN 15964:2011 for Breath alcohol test devices other than single use devices.
This model includes a battery operated Mobile Folio Printer which prints results immediately upon breathalyser testing as well as captures and stores breathalyser results after each test for downloading and analysis.
Alcoscan ALP-1 contains the latest 1-Inch full size Fuel Cell Sensor providing the highest accuracy available and ethanol specific results and a long calibration cycle.
Provides both FAST no mouthpiece testing and NORMAL mouthpiece testing.
Memory: Password protected last 500 test results with date and time of each test.
This unit is suitable for Industrial and Law-Enforcement screening.
Annual Calibration is recommended.
Specifications
Annual calibration is recommended.
Category Contents Indication of B.A.C 0.000 to 4.000% or 0.000 to 0.400%BAC or 0.00 to 2.50 Mg/l BrAC by LCD display td> Accuracy +/-0.005%BAC at 0.100%BAC Mouth piece 5 full mouthpieces supplied with unit and additional mouthpieces available; 1 blow cup supplied with unit Sensor Full Size 1-Inch fully replaceable Electro-chemical Fuel Cell Sensor – Ethanol Specific Power supply Two 1.5V “AA” Alkaline batteries Weight 198g (Including batteries) – breathalyser only Dimension (mm) 133 (height) X 64 (width) X 33 Remarks – Auto power off
– Includes a Mobile Folio Printer, PC Software and Connector Cables.
– Battery Low indication
– Memory: Last 500 tests
– Meets EN Standard – EN 15964:2011
– Air flow rate checking in case of low breath volume
– Annual Calibration Reminder
– Certified Water resistant to IP54 rating IEC 60529:2001
– PASS/FAIL Fast testing set to provide FAIL from 0.01% B.A.CWE RECOMMEND THAT YOU ADD A PACK OF 100 ALP-1 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT
SKU: n/a - Personal Care, Safety & Security
Alcoscan AL6000 Lite
Alcoscan AL6000 Lite is a hand held portable breathalyzer
used to check breath alcohol concentration. The device houses a
specialised flow-rate controller to ensure accuracy by testing a full
litre of air exhaled from the lungs.
AL6000 Lite is suitable for both personal use and in small workplaces
for random alcohol testing with limited daily to monthly alcohol
testing.
Annual calibration is recommended.
Category Contents Indication of B.A.C Normal Mode Only: 0.00 to 0.40% B.A.C. or mg/l equivalent by LED display Accuracy +/-0.010%BAC at 0.050%BAC Mouth piece 5 supplied with unit and additional mouthpieces available Sensor Semiconductor type alcohol sensor Power supplyTwo 1.5V “AA” Alkaline batteries Weight 115g (Including batteries) Dimension (mm) 124 (height) X 56 (width) X 41 Remarks – Auto power off
– Battery Low indication
– CE, FDA approval
– Air flow rate checkingWE RECOMMEND THAT YOU ADD A PACK OF 100 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT
SKU: n/a
There are no reviews yet.