No products in the cart.
-
Lifeloc FC10 Breathalyzer
Breathalysers trusted by law enforcement
Lifeloc FC10 portable
breathalysers are true workhorses of alcohol testers and used extensively by
law enforcement and industry professionals. FC10 breathalysers combine high
precision, ease of use and ruggedness with affordability. These breathalysers include
both direct BAC testing and passive testing. Passive testing does not require a
mouthpiece and is perfect for rapid “zero tolerance” alcohol
screening of subjects and open containers. Known for its long life and fast
recovery times, the FC10 is likely the only breath alcohol tester you will ever
need.
₵4,300.00Lifeloc FC10 Breathalyzer
₵4,300.00 -
iBlow10 Industrial Law-Enforcement Breathalyzer BASIC PACK
iBlow10 is a high speed breathalyzer screener for testing drivers at road blocks and workers entering industrial sites.
iBlow10 has a SuraCell Fuel Cell Sensor for ethanol specific alcohol testing which provides a long calibration cycle of 1 year.
Digital Display of Test Results as well as GREEN or RED bright LED
display based on a PASS or FAIL when any amount of alcohol is detected
in breath OR based on a pre-set PASS / FAIL Limit depending on whether
iBlow10 is ordered for Industrial Use or Law-Enforcement Use.
iBlow10 provides 12 tests p/minute without the use of mouth pieces.
iBlow10 offers Active and Passive testing for when drivers or workers have difficulty exhaling.
LEDs for Night Time use with RED BLUE and BLUE ONLY options to direct drivers.
Stock Available & Price includes VAT
₵3,080.00₵4,000.00iBlow10 Industrial Law-Enforcement Breathalyzer BASIC PACK
₵3,080.00₵4,000.00 -
iBlow10 Industrial Law-Enforcement Breathalyser FULL PACK
iBlow10 is a high speed breathalyser screener for testing drivers on the road & at road blocks & workers entering industrial sites.iBlow10 has a SuraCell Fuel Cell Sensor for ethanol specific alcohol testing which provides a long calibration cycle of 1 year. Digital Display of Results as well as GREEN or RED bright LED display based on a PASS or FAIL when any alcohol is detected in breath OR based on a pre-set PASS / FAIL Limit depending on whether iBlow10 is ordered for Industrial Use or Law-Enforcement Use.
iBlow10 provides 12 tests per minute without the use of mouth pieces
& offers Active and Passive testing for when drivers or workers have difficulty exhaling. LEDs for Night Time Use providing RED BLUE and BLUE ONLY options to direct drivers. Includes free downloadable PC software to download breathalyser test data from iBlow10 to a PC for analysis and record keeping.
₵4,850.00₵5,200.00iBlow10 Industrial Law-Enforcement Breathalyser FULL PACK
₵4,850.00₵5,200.00 -
FC5 Sentinel Entry Breathalyser
FC5 Sentinel Entry Breathalyser
Fixed professional grade breathalyser
Fixed professional entry breath alcohol tester
The FC5 Sentinel is a fixed, wall-mounted entrance breathalyser that facilitates operator-free breath alcohol testing in high volume, safety sensitive work environments. This automated entry breathalyser can easily be integrated into most access control systems including turnstiles and security controlled access points.
Ideal for locations such as oil and gas refineries, construction sites, maritime, mining and general industry, the FC5 Sentinel entry breath breathalyser needs no human intervention, reduces fraudulent testing and alleviates entry-point bottlenecks, as it resets almost instantly when there’s a negative result.
Entrance breathalyser for workplace substance abuse
Lifeloc has a proven, 25 year track record in accurate, fast and repeatable breath alcohol testing. The FC5 Sentinel breathalyser is ideal for zero tolerance environments and doesn’t require a mouthpiece. Readings are easy to understand, with a full colour LCD screen and clear icons. Logos, test sequences and messaging can be fully customized.
An entrance breathalyser with easy servicing and maintenance
On-site calibration is performed annually irrespective of the number of tests conducted.
- No need to open the housing, simply hold the adapter over breath port and follow prompts on the touch screen.
- Automatic remote software updates done using a USB.
- Side hinge design allows the unit to be opened without removing it from the wall.
₵19,000.00₵25,000.00FC5 Sentinel Entry Breathalyser
₵19,000.00₵25,000.00 -
FC5 Hornet
FC5 Hornet Breathalyzers
FC 5 breathalyser showing positive and negative readings Economical FC5 Hornet breathalyzers from Lifeloc Technologies is a new generation of alcohol breathalyzers for use in zero tolerance environments such as Oil & Gas Refineries, Construction, Maritime, Mining and General Industry. Testing for the presence of alcohol has never been easier. No mouthpieces or special attachments are required when using these breathalyzers and icons are used to eliminate misinterpretation due to language barriers, the FC5 Hornet passive breathalyzer is simple to learn, operate and read.
Breathalyzers that are easy to use
Designed to replace older technology alcohol tester wands, the FC5 Hornet breathalyzers are easy to use with new features never before available in passive only screening testers. The FC5 is alcohol specific and uses the same 1 inch diameter platinum fuel cell used in Lifeloc law enforcement breathalyzers. Because our fuel cell is 50% larger than those used in the traditional alcohol wands you benefit from larger breath sample size, rapid response and reset times, and long working life.
FC 5 Hornet breathalyzers are robust and discreet
Unlike the older alcohol wands, the FC5 Hornet comes standard with three operating test modes and an automatic day/night backlit display. For safety, the operator can see the test results without revealing the display to the subject. These breathalyzers come with a protective safety
₵6,800.00FC5 Hornet
₵6,800.00 -
FC20 BT alcohol tester
Lifeloc’s top of the line professional alcohol tester, the FC20BT has been enhanced to include wireless communication providing truly mobile alcohol abuse testing. Using Bluetooth™ technology you can now connect your FC20BT alcohol tester to printers, keyboards, and other Bluetooth™ enabled devices. This premium alcohol tester also comes with automatic, manual and passive testing and standard 500 test memory.
An alcohol tester that provides customisation
The FC20BT alcohol tester comes standard with automatic, manual and passive testing, and includes 500 on-board test memory. The flexible operating system allows for true customization of languages, units of measure, security features and much more. At PSA Africa we work with our customers to develop “Sequence Software” that can be tailored to your specific testing process ensuring compliance.
The optional Bluetooth keyboard allows for easy data entry with printing
options that include a wireless thermal printer or direct printing from your PC
using Lifeloc’s
Simply put, the FC20BT breathalyzer is the easiest to use, most powerful, capable and versatile PBT on the market.
- U.S. DOT (NHTSA) conforming product
- Factory synched Bluetooth printer and keyboard (when purchasing a kit)
- 33′ Bluetooth connectivity
- Secure, encrypted data transmission
- Blue LED communication indicator
- Automatic, Manual and Passive sampling modes
- Auto adjusting backlit LCD for excellent day or night visibility
- EasyTab™ mouthpiece eliminates operator contact with wet-end of mouthpiece
- Breath flow directed away from the operator
- Fastest response and recovery times in the industry
- Easy to understand user prompts step the operator through each test
- Audible and Graphical breath flow and BAC level indicators
- Exceptional battery life provides up to 6,000 tests: rechargeable or standard
- 1″ platinum fuel cell
- 4000 Test Memory
- Advanced security features such as password protection
- Real time clock for time and date stamping
- Patented Lifeloc sampling and measurement algorithms
- Popular international language options and units of measure available
- Keyboard option for easy data entry
- Automatic calibration, calibration verification and record retention when used with Lifeloc EASYCAL® station
- Computer interface and remote diagnostics using AlcoMark® Software
- Optional Barometric Pressure Sensor
- Preview the FC Series Training and User Manual
- Made in USA
The FC20 is also available with Bluetooth capability, see more.
Markets: Law Enforcement, Drug Courts, DUI Courts, Corrections, Parole, Probation, Military, Maritime, Schools, School Resource Officers, Halfway Houses, Alcohol & Drug Abuse Treatment Facilities, International
₵8,000.00FC20 BT alcohol tester
₵8,000.00 -
FC20 breathalyzer
Top of the range professional breathalyzer
Lifeloc’s top of the line professional alcohol breathalyzer, the FC20 is the most advanced and feature rich breathalyzer on the market. Our premium alcohol breathalyzer includes automatic, manual and passive testing, standard 500 test memory, printing capability, and full computer interface.
A breathalyzer with advanced features
The Lifeloc FC20 breathalyzer operating system is built for user flexibility. It allows departmental customization of important security functions and testing protocols. Lifeloc “Sequence” software ensures each step of the testing process can be tailored to your specific test protocol.
The optional keyboard allows for easy data entry of operator and subject designated information such as location or subject ID. Printing options include Thermal, Impact, or direct printing from your PC using Lifeloc’s DataTrak® software.Simply put, the FC20 breathalyzer is the easiest to use, most powerful and versatile alcohol tester on the market.
₵6,900.00FC20 breathalyzer
₵6,900.00 -
-
Alcoscan Interlock Breathalyser ALX1000
Alcoscan ALX1000 is an Electrochemical Fuel Cell sensor based interlock breathalyser supplied with an ignition interlock for connecting to the ignition of a motor vehicle, bus or truck.
After getting into the vehicle with the ALX1000 installed, the driver is required to blow into the breathalyser to be tested for alcohol. Depending on the result of analysis the ignition interlock will allow the vehicle to start or not.
Alcoscan ALX1000 is suitable for trucks, busses, taxis and fleet managed vehicles to ensure that drivers do not drive while under the influence of alcohol.
This system can be incorporated with the tracking systems for vans, busses and trucks.
Annual calibration is recommended.
Specifications
Annual calibration is recommended.
Category Contents Indication of B.A.C 0.00 to 0.40% B.A.C. or mg/l equivalent by LED display Accuracy +/-0.005%BAC at 0.100%BAC Mouth piece 5 full mouthpieces supplied with unit and additional mouthpieces available; 1 blow cup supplied with unit Sensor Fuel Cell type alcohol sensor Power supply Two 1.5V “AA” Alkaline batteries and power when connected to Interlock Device Weight 100g (Including batteries) Dimension (mm) 105 (height) X 50 (width) X 18 Remarks Auto power off
– Battery Low indication
– CE, FDA approval
– Air flow rate checkingThe Interlock device can be installed by an auto electrician and the pricing given does not include any installation costs.
WE RECOMMEND THAT YOU ADD A PACK OF 100 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT
₵4,862.00Alcoscan Interlock Breathalyser ALX1000
₵4,862.00 -
Alcoscan Entrance Breathalyser System EBS010 – INSTALLED
Alcoscan EBS010 is a high speed automatic industrial breathalyser that is used to check the breath of workers for alcohol at Turn Stile gates and Entrances to sites, offices, mines, refineries and warehouses.
Result outputs are provided by a 12V 1 sec pulse separate for Pass and Fail and by digital USB output in PC mode.
If Dry Contact Relay OUTPUT for Pass and Fail is required an optional extra Relay Box is available.
A Pass result allows access and a Fail result prevents access. Breath tests are ethanol specific and EBS010 performs over 600 tests per hour. Alcoscan EBS010 is built for Industrial and High Security environments.
Annual calibration is recommended.
This is the Installed Option.
Specifications
Annual calibration is recommended.
Category Contents Indication of B.A.C 1) Pass is below 0.01% B.A.C. Fail can be set to fail from 0.01% B.A.C and up Accuracy +/-0.005%BAC at 0.100%BAC Mouth piece No Mouthpiece required Sensor Replaceable fuel cell type alcohol sensor Power supply 12VDC 1.5A power supply required – Supplied Standard Weight 550g Dimension (mm) 205 (height) X 108 (width) X 95 Remarks – Auto power off
– Air flow rate checking for no blows
– Calibrated to fail from 0.01% B.A.C to prevent access at the lowest possible BrAC levels
– Pricing excludes travel expenses to and from Sites
– This pricing includes Installation in Series with a Turnstile Gate or Mag-Locking Gate and not full integration into a Time-Keeping System₵9,800.00 -
Alcoscan Entrance Breathalyser System EBS010
Alcoscan EBS010 is a high speed automatic industrial breathalyser that is used to check the breath of workers for alcohol at Turn Stile gates and Entrances to sites, offices, mines, refineries and warehouses.
Result outputs are provided by a 12V 1 sec pulse separate for Pass and Fail and by digital USB output in PC mode.
If Dry Contact Relay OUTPUT for Pass and Fail is required an optional extra Relay Box is available.
A Pass result allows access and a Fail result prevents access. Breath tests are ethanol specific and EBS010 performs over 600 tests per hour. Alcoscan EBS010 is built for Industrial and High Security environments.
Annual calibration is recommended.
Specifications
Annual calibration is recommended.
Category Contents Indication of B.A.C 1) Pass is below 0.01% B.A.C. Fail can be set to fail from 0.01% B.A.C and up Accuracy +/-0.005%BAC at 0.100%BAC Mouth piece No Mouthpiece required Sensor Replaceable fuel cell type alcohol sensor Power supply 12VDC 1.5A power supply required – Supplied Standard Weight 550g Dimension (mm) 205 (height) X 108 (width) X 95 Remarks Auto power off
– Air flow rate checking for no blows
– Calibrated to fail from 0.01% B.A.C to prevent access at the lowest possible BrAC levels
– Pricing excludes installation costs
– Time keeping and attendance technicians can easily install₵7,080.00 -
Alcoscan ALP-1 incl Printer for Industry and Law-Enforcement BT
Alcoscan ALP-1 BT is a fully portable IP54 rated water resistant Fuel Cell Sensor Industry and Law-Enforcement screener.
ALP-1 meets the EN Standard – EN 15964:2011 for Breath alcohol test devices other than single use devices.
This model includes a battery operated Mobile Folio Printer which prints results immediately upon breathalyser testing as well as captures and stores breathalyser results after each test for downloading and analysis.
Alcoscan ALP-1 contains the latest 1-Inch full size Fuel Cell Sensor providing the highest accuracy available and ethanol specific results and a long calibration cycle.
Provides both FAST no mouthpiece testing and NORMAL mouthpiece testing.
Memory: Password protected last 500 test results with date and time of each test.
This unit is suitable for Industrial and Law-Enforcement screening.
Annual Calibration is recommended.
Specifications
Annual calibration is recommended.
Category Contents Indication of B.A.C 0.000 to 4.000% or 0.000 to 0.400%BAC or 0.00 to 2.50 Mg/l BrAC by LCD display td> Accuracy +/-0.005%BAC at 0.100%BAC Mouth piece 5 full mouthpieces supplied with unit and additional mouthpieces available; 1 blow cup supplied with unit Sensor Full Size 1-Inch fully replaceable Electro-chemical Fuel Cell Sensor – Ethanol Specific Power supply Two 1.5V “AA” Alkaline batteries Weight 198g (Including batteries) – breathalyser only Dimension (mm) 133 (height) X 64 (width) X 33 Remarks – Auto power off
– Includes a Mobile Folio Printer, PC Software and Connector Cables.
– Battery Low indication
– Memory: Last 500 tests
– Meets EN Standard – EN 15964:2011
– Air flow rate checking in case of low breath volume
– Annual Calibration Reminder
– Certified Water resistant to IP54 rating IEC 60529:2001
– PASS/FAIL Fast testing set to provide FAIL from 0.01% B.A.CWE RECOMMEND THAT YOU ADD A PACK OF 100 ALP-1 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT
₵7,660.00 -
Alcoscan ALP-1 incl Printer for Industry and Law-Enforcement
Alcoscan ALP-1 is a fully portable IP54 rated water resistant Fuel Cell Sensor Industry and Law-Enforcement screener.
ALP-1 meets the EN Standard – EN 15964:2011 for Breath alcohol test devices other than single use devices.
This model includes a battery operated Mobile Folio Printer which prints results immediately upon breathalyser testing as well as captures and stores breathalyser results after each test for downloading and analysis.
Alcoscan ALP-1 contains the latest 1-Inch full size Fuel Cell Sensor providing the highest accuracy available and ethanol specific results and a long calibration cycle.
Provides both FAST no mouthpiece testing and NORMAL mouthpiece testing.
Memory: Password protected last 500 test results with date and time of each test.
This unit is suitable for Industrial and Law-Enforcement screening.
Annual Calibration is recommended.
Specifications
Annual calibration is recommended.
Category Contents Indication of B.A.C 0.000 to 4.000% or 0.000 to 0.400%BAC or 0.00 to 2.50 Mg/l BrAC by LCD display td> Accuracy +/-0.005%BAC at 0.100%BAC Mouth piece 5 full mouthpieces supplied with unit and additional mouthpieces available; 1 blow cup supplied with unit Sensor Full Size 1-Inch fully replaceable Electro-chemical Fuel Cell Sensor – Ethanol Specific Power supply Two 1.5V “AA” Alkaline batteries Weight 198g (Including batteries) – breathalyser only Dimension (mm) 133 (height) X 64 (width) X 33 Remarks – Auto power off
– Includes a Mobile Folio Printer, PC Software and Connector Cables.
– Battery Low indication
– Memory: Last 500 tests
– Meets EN Standard – EN 15964:2011
– Air flow rate checking in case of low breath volume
– Annual Calibration Reminder
– Certified Water resistant to IP54 rating IEC 60529:2001
– PASS/FAIL Fast testing set to provide FAIL from 0.01% B.A.CWE RECOMMEND THAT YOU ADD A PACK OF 100 ALP-1 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT
₵7,465.00 -
Alcoscan ALP-1 for Industry and Law-Enforcement BT
Alcoscan ALP-1 BT is a fully portable IP54 rated water resistant Fuel Cell Sensor breathalyser for Law-Enforcement and Industry alcohol screening.
ALP-1 meets the EN Standard – EN 15964:2011 for Breath Alcohol test devices other than single use devices.
ALP-1 captures and stores alcohol test results after each test which can be downloaded and analysed later on a PC.
Alcoscan ALP-1 contains the latest 1-Inch full size Fuel Cell Sensor providing the highest accuracy available and ethanol specific results and providing for a long calibration cycle.
Provides both FAST no mouthpiece testing and NORMAL mouthpiece testing.
Memory: Password protected last 500 test results including date and time of each test.
This unit is suitable for Industry and Law Enforcement screening.
Annual Calibration is recommended.
Specifications
Annual calibration is recommended.
Category Contents Indication of B.A.C 0.000 to 4.000% or 0.000 to 0.400%BAC or 0.00 to 2.50 Mg/l BrAC by LCD display td> Accuracy +/-0.005%BAC at 0.100%BAC Mouth piece 5 full mouthpieces supplied with unit and additional mouthpieces available; 1 blow cup supplied with unit Sensor Full Size 1-Inch fully replaceable Electro-chemical Fuel Cell Sensor – Ethanol Specific Power supply Two 1.5V “AA” Alkaline batteries Weight 198g (Including batteries) – breathalyser only Dimension (mm) 133 (height) X 64 (width) X 33 Remarks Auto power off
– Includes PC Software, USB Cable contained in a secure plastic carry case
– Battery Low indication
– Meets EN Standard – EN 15964:2011
– Air flow rate checking in case of low breath volume
– Annual Calibration Reminder
– Certified Water resistant to IP54 rating IEC 60529:2001
– PASS/FAIL Fast testing set to provide a Fail result from 0.01% B.A.CWE RECOMMEND THAT YOU ADD A PACK OF 100 ALP-1 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT
₵4,250.00 -
Alcoscan ALP-1 for Industry and Law-Enforcement
Alcoscan ALP-1 is a fully portable IP54 rated water resistant Fuel Cell Sensor breathalyser for Law-Enforcement and Industry alcohol screening.ALP-1 meets the EN Standard – EN 15964:2011 for Breath Alcohol test devices other than single use devices.ALP-1 captures and stores alcohol test results after each test which can be downloaded and analysed later on a PC.Alcoscan ALP-1 contains the latest 1-Inch full size Fuel Cell Sensor providing the highest accuracy available and ethanol specific results and providing for a long calibration cycle.
Provides both FAST no mouthpiece testing and NORMAL mouthpiece testing.
Memory: Password protected last 500 test results including date and time of each test.This unit is suitable for Industry and Law Enforcement screening.
Annual Calibration is recommended.
Specifications
Annual calibration is recommended.
Category Contents Indication of B.A.C 0.000 to 4.000% or 0.000 to 0.400%BAC or 0.00 to 2.50 Mg/l BrAC by LCD display Accuracy +/-0.005%BAC at 0.100%BAC Mouth piece 5 full mouthpieces supplied with unit and additional mouthpieces available; 1 blow cup supplied with unit Sensor Full Size 1-Inch fully replaceable Electro-chemical Fuel Cell Sensor – Ethanol Specific Power supply Two 1.5V “AA” Alkaline batteries Weight 198g (Including batteries) – breathalyser only Dimension (mm) 133 (height) X 64 (width) X 33 Remarks Auto power off
– Includes PC Software, USB Cable contained in a secure plastic carry case
– Battery Low indication
– Meets EN Standard – EN 15964:2011
– Air flow rate checking in case of low breath volume
– Annual Calibration Reminder
– Certified Water resistant to IP54 rating IEC 60529:2001
– PASS/FAIL Fast testing set to provide a Fail result from 0.01% B.A.CWE RECOMMEND THAT YOU ADD A PACK OF 100 ALP-1 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT
₵4,150.00 -
Alcoscan ALC-1
Alcoscan ALC-1 is a high-end Personal, Workplace or
Law-Enforcement alcohol tester with a fast reacting Fuel Cell Alcohol
Sensor used to check breath alcohol concentration quickly and
accurately.
It offers the highest accuracy levels available for portable alcohol testers with a long calibration cycle.ALC-1 is suitable for use in the workplace or on the roads as a screener.
Annual calibration is recommended.
Specifications
Annual calibration is recommended.
Category Contents Indication of B.A.C 1) Normal Mode: 0.00 to 0.40% B.A.C. or mg/l equivalent by LED display td> Accuracy +/-0.005%BAC at 0.100%BAC Mouth piece 5 supplied with unit and additional mouthpieces available Sensor Fuel Cell Type Alcohol Sensor Power supply Two 1.5V “AAA” Alkaline batteries – Two Supplied with unit Weight 115g (Including batteries) Dimension (mm) 124 (height) X 56 (width) X 41 Remarks Auto power off
– Battery Low indication
– CE, FDA approval
– Air flow rate checkingWE RECOMMEND THAT YOU ADD A PACK OF 100 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT
₵1,700.00Alcoscan ALC-1
₵1,700.00 -
Alcoscan AL9000 / AL9010 including Printer
Alcoscan AL9000 / AL9010 including Mobile Printer is a
high quality hand held, portable Fuel Cell Sensor alcohol tester used to
check breath alcohol concentration with Law-Enforcement accuracy.
AL9000P interfaces with and is supplied with a portable battery operated
folio printer and is also 12V operated for the capturing and printing
of breathalyser test results when performing an alcohol test in a
work-place, at a site or on the road.
AL9000P / AL9010 houses the latest Fuel Cell Sensor Technology providing
the highest accuracy available with a long calibration cycle.
MEMORY FUNCTION:
AL9000P / AL9010 Breathalyser unit displays the last test result
AL9000P / AL9010 Printer stores the last 100 tests result (date, time,
test result) and you can print out the last 100 test results on paper
only.
This unit is suitable for use in the workplace
Specifications
Annual calibration is recommended.
Category Contents Indication of B.A.C 1) Normal Mode: 0.00 to 0.40% B.A.C. or mg/l equivalent by LED display td> Accuracy +/-0.005%BAC at 0.100%BAC Mouth piece 5 supplied with unit and additional mouthpieces available Sensor Electro-chemical Fuel Cell Type Alcohol Sensor Power supply Two 1.5V “AAA” Alkaline batteries – Two Supplied with unit Weight 115g (Including batteries) Dimension (mm) 124 (height) X 56 (width) X 41 Remarks Auto power off
– Battery Low indication
– CE, FDA approval
– Air flow rate checking
– Battery and 12V operated portable folio printer includedWE RECOMMEND THAT YOU ADD A PACK OF 100 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT
₵5,220.00₵8,500.00Alcoscan AL9000 / AL9010 including Printer
₵5,220.00₵8,500.00 -
Alcoscan AL8800
Alcoscan AL8800 is a fast reacting Fuel Cell Sensor portable breathalyser.
Fuel Cell Sensor Technology provides Law-Enforcement accuracy, Ethanol Specific testing and a long calibration cycle.Alcoscan AL8800 is esay to operate, handy and compact making it suitable for personal use and in the workplace.
AL8800 also offers Passive Mode testing which provides a Pass (P) or
Fail (F) based on a preset limit of 0.02% BAC. Less than 0.02% BAC then
you Pass (P) and 0.02% BAC or above you Fail (F).
Annual calibration is recommended.
Category Contents Indication of B.A.C 1) Normal Mode: 0.00 to 0.40% B.A.C. or mg/l equivalent by LED display td> Accuracy +/- 10% at 0.050%BAC Mouth piece 5 supplied with unit and additional mouthpieces available Sensor Fuel Cell Alcohol Sensor Power supply Two 1.5V “AAA” Alkaline batteries – Two Supplied with unit Weight 83g (Including batteries) Dimension (mm) (height) X 54 (width) X 18 Remarks Auto power off
– Battery Low indication
– CE, FDA approval
– Air flow rate checkingINCLUDES A POUCH & CARRY CASE & WE RECOMMEND THAT YOU ADD A PACK OF 100 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT
₵1,480.00Alcoscan AL8800
₵1,480.00 -
Alcoscan AL7000 Premium
Alcoscan AL7000 is a Premium hand held, portable digital alcohol tester.
This unit is suitable for personal use, in small workplaces and on the move for limited daily to weekly alcohol testing.
The AL7000 sensor can be changed very easily and the unit doesn’t need
to be returned to us for calibration. Pre-calibrated sensors can simply
be sent to your location. Clip out the old sensor and clip in the new
sensor.
Annual calibration / Sensor replacement is recommended.
Category Contents Indication of B.A.C 0.00 to 0.40% B.A.C. or mg/l equivalent by LED display Accuracy +/-0.010%BAC at 0.050%BAC Mouth piece 5 supplied with unit and additional mouthpieces available Sensor Semiconductor Type Alcohol Sensor Power supply Two 1.5V “AA” Alkaline batteries &12V in car adaptor included Weight 103g (Including batteries) Dimension (mm) 116 (height) X 50 (width) X 21 Remarks Auto power off
– Battery Low indication
– CE, FDA approval
– Air flow rate checking
– Self sensor testing
– Easy to replace sensor
– Features the ability to change sensors on one’s own.WE RECOMMEND THAT YOU ADD A PACK OF 100 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT
₵1,450.00₵1,900.00Alcoscan AL7000 Premium
₵1,450.00₵1,900.00 -
Alcoscan AL6000 Professional
AlcoScan AL6000 Professional is a high quality hand held, portable alcohol tester.
AL6000 Professional uses a specialised flow-rate controller which allows for two modes of testing:
– NORMAL MODE testing requires a mouthpiece and a full litre of air to be blown to calculate a result.
– FAST MODE testing to quickly test a number of persons in quick succession without using a mouthpiece and without a full litre of air being required.AL6000 Professional is suitable for both personal use and in small workplaces for random alcohol testing with limited daily to monthly alcohol testing.
Annual calibration / Sensor replacement is recommended.
Category Contents Indication of B.A.C 1) Normal Mode: 0.00 to 0.40% B.A.C. or mg/l equivalent by LED display
2) Fast Mode: Zero, Low, High (3 steps)Accuracy +/-0.010%BAC at 0.050%BAC Mouth piece 5 supplied with unit and additional mouthpieces available Sensor Semiconductor Type Alcohol Sensor Power supply Two 1.5V “AA” Alkaline batteries Weight 115g (Including batteries) Dimension (mm) 124 (height) X 56 (width) X 41 Remarks Auto power off
– Battery Low indication
– CE, FDA approval
– Air flow rate checking
E RECOMMEND THAT YOU ADD A PACK OF 100 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT₵1,513.00₵1,900.00Alcoscan AL6000 Professional
₵1,513.00₵1,900.00 -
Alcoscan AL6000 Lite
Alcoscan AL6000 Lite is a hand held portable breathalyzer
used to check breath alcohol concentration. The device houses a
specialised flow-rate controller to ensure accuracy by testing a full
litre of air exhaled from the lungs.
AL6000 Lite is suitable for both personal use and in small workplaces
for random alcohol testing with limited daily to monthly alcohol
testing.
Annual calibration is recommended.
Category Contents Indication of B.A.C Normal Mode Only: 0.00 to 0.40% B.A.C. or mg/l equivalent by LED display Accuracy +/-0.010%BAC at 0.050%BAC Mouth piece 5 supplied with unit and additional mouthpieces available Sensor Semiconductor type alcohol sensor Power supplyTwo 1.5V “AA” Alkaline batteries Weight 115g (Including batteries) Dimension (mm) 124 (height) X 56 (width) X 41 Remarks – Auto power off
– Battery Low indication
– CE, FDA approval
– Air flow rate checkingWE RECOMMEND THAT YOU ADD A PACK OF 100 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT
₵1,200.00₵1,475.00Alcoscan AL6000 Lite
₵1,200.00₵1,475.00 -
Alcoscan AL5500 Personal Breathalyser
Alcoscan AL5500 is a very easy to use, reliable and
re-usable hand held personal breathalyser. It uses microcomputer control
with a 3 digit LCD display and audio cues.
The last test result and cumulative test count will be displayed when you hold the power switch down before performing a test.
The unit requires mouthpieces or drinking straws for correct operation.
This unit is suitable for personal use and not to test employees.
Annual calibration is recommended.
Specifications
Category Contents Indication of B.A.C 0.00 to 0.40% B.A.C. or mg/l equivalent by LED display Warming up Below 30 Seconds Response time Within 2 Seconds Mouth piece Yes required. (5 supplied standard). Plastic Drinking Straws can be used. Sensor Semiconductor type alcohol sensor Continuous usage Over 2 hours without battery change Power supply Two 1.5V “AA” Alkaline batteries Weight 89g (Including batteries) Dimension (mm) 110 X 46 X 20 Remarks – Auto power off
– Audible Alerts
– Battery Low indication
– Air Flow Rate Checking for correct breath sample
– Secret, sleek and simple design
– CE₵1,015.00₵1,200.00Alcoscan AL5500 Personal Breathalyser
₵1,015.00₵1,200.00 -
Alcoscan AL2500 Elite Personal Breathalyser
Alcoscan AL2500 is a very easy to use, reliable and re-usable hand held personal
breathalyser. It uses microcomputer control with a 3 digit LCD display and audio cues.
This unit is suitable for personal use only and not to test employees.
Annual calibration is recommended.
Specifications
Category
Contents
Indication of B.A.C
0.00 to 0.40% B.A.C. or mg/l equivalent by LED display
Warming up
Below 30 Seconds
Response time
Within 2 Seconds
Mouth piece
None required
Sensor
Semiconductor type alcohol sensor
Continuous usage
Over 2 hours without battery recharge
Power supply
Two 1.5V “AA” Alkaline batteries
Weight
85g (Including batteries)
Dimension (mm)
104 X 40 X 20
Remarks
– Auto power off
– Battery Low indication
– Air Flow Rate Checking
– CE, FDA approval
₵732.00₵1,200.00Alcoscan AL2500 Elite Personal Breathalyser
₵732.00₵1,200.00 -
Alcoscan AL1100F VuvuThela Industry Breathalyser
Alcoscan AL1100F is a highly sensitive breathalyzer screener for testing the breath of drivers and workers entering sites.
AL1100F has a Fuel Cell Sensor for ethanol specific alcohol testing and provides a long calibration cycle of 1 year before requiring calibration.
Alcoscan AL1100F permits approximately 12 tests per minute without the use of mouth pieces.
AL1100F provides both Active and Passive testing with Passive testing being effective when drivers or workers have difficulty exhaling.
Annual calibration is recommended.
Category Contents
Indication of B.A.C – PASS 0.000 to 0.009 B.A.C. indicated by GREEN LED
– WARNING / LOW 0.01 to 0.049% B.A.C. indicated by AMBER LED
– FAIL at 0.05 % B.A.C and above indicated by RED LED – On or Over Legal Driving Limit in South Africa -These limits are adjustable to your requirements.
Accuracy +/-0.005%BAC at 0.100%BAC Mouth piece No Mouthpiece Required – No Touch Design Sensor Type Electro-chemical Fuel Cell Alcohol Sensor – Ethanol Specific Power supply 12V AC fully rechargeable unit. 12V Power Supply included and In-car charger included Weight 180g Dimension (mm) 150 (height) X 75 (width) X 24 Notes – Auto power off, Battery Low Indication and fully re-chargeable.
– Robust Silicone Skin with magnet provided standard
– Air flow rate checking for no blows
– For Law-Enforcement AL1100F is Calibrated to Warn (Amber) at Professional Driver Legal Limit of 0.02%B.A.C (0.10Mg/l BrAC & Fail (Red) at Legal Limit of 0.05%B.A.C (0.24Mg/ BrAC)₵2,264.00₵3,250.00Alcoscan AL1100F VuvuThela Industry Breathalyser
₵2,264.00₵3,250.00