Personal Care, Safety & Security
Alcoscan ALP-1 incl Printer for Industry and Law-Enforcement BT
Alcoscan ALP-1 BT is a fully portable IP54 rated water resistant Fuel Cell Sensor Industry and Law-Enforcement screener.
ALP-1 meets the EN Standard – EN 15964:2011 for Breath alcohol test devices other than single use devices.
This model includes a battery operated Mobile Folio Printer which prints results immediately upon breathalyser testing as well as captures and stores breathalyser results after each test for downloading and analysis.
Alcoscan ALP-1 contains the latest 1-Inch full size Fuel Cell Sensor providing the highest accuracy available and ethanol specific results and a long calibration cycle.
Provides both FAST no mouthpiece testing and NORMAL mouthpiece testing.
Memory: Password protected last 500 test results with date and time of each test.
This unit is suitable for Industrial and Law-Enforcement screening.
Annual Calibration is recommended.
Specifications
Annual calibration is recommended.
| Category | Contents |
| Indication of B.A.C | 0.000 to 4.000% or 0.000 to 0.400%BAC or 0.00 to 2.50 Mg/l BrAC by LCD display td> |
| Accuracy | +/-0.005%BAC at 0.100%BAC |
| Mouth piece | 5 full mouthpieces supplied with unit and additional mouthpieces available; 1 blow cup supplied with unit |
| Sensor | Full Size 1-Inch fully replaceable Electro-chemical Fuel Cell Sensor – Ethanol Specific |
| Power supply | Two 1.5V “AA” Alkaline batteries |
| Weight | 198g (Including batteries) – breathalyser only |
| Dimension (mm) | 133 (height) X 64 (width) X 33 |
| Remarks | – Auto power off – Includes a Mobile Folio Printer, PC Software and Connector Cables. – Battery Low indication – Memory: Last 500 tests – Meets EN Standard – EN 15964:2011 – Air flow rate checking in case of low breath volume – Annual Calibration Reminder – Certified Water resistant to IP54 rating IEC 60529:2001 – PASS/FAIL Fast testing set to provide FAIL from 0.01% B.A.C WE RECOMMEND THAT YOU ADD A PACK OF 100 ALP-1 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT |
₵7,660.00
Vendor Information
- Store Name: Alcohol Breathalysers
- Vendor: Alcohol-Breathalysers
- Address: P.o box 13095
Accra
Great Accra Region - No ratings found yet!
- Personal Care, Safety & Security
Alcoscan Interlock Breathalyser ALX1000
Alcoscan ALX1000 is an Electrochemical Fuel Cell sensor based interlock breathalyser supplied with an ignition interlock for connecting to the ignition of a motor vehicle, bus or truck.
After getting into the vehicle with the ALX1000 installed, the driver is required to blow into the breathalyser to be tested for alcohol. Depending on the result of analysis the ignition interlock will allow the vehicle to start or not.
Alcoscan ALX1000 is suitable for trucks, busses, taxis and fleet managed vehicles to ensure that drivers do not drive while under the influence of alcohol.
This system can be incorporated with the tracking systems for vans, busses and trucks.
Annual calibration is recommended.
Specifications
Annual calibration is recommended.
Category Contents Indication of B.A.C 0.00 to 0.40% B.A.C. or mg/l equivalent by LED display Accuracy +/-0.005%BAC at 0.100%BAC Mouth piece 5 full mouthpieces supplied with unit and additional mouthpieces available; 1 blow cup supplied with unit Sensor Fuel Cell type alcohol sensor Power supply Two 1.5V “AA” Alkaline batteries and power when connected to Interlock Device Weight 100g (Including batteries) Dimension (mm) 105 (height) X 50 (width) X 18 Remarks Auto power off
– Battery Low indication
– CE, FDA approval
– Air flow rate checkingThe Interlock device can be installed by an auto electrician and the pricing given does not include any installation costs.
WE RECOMMEND THAT YOU ADD A PACK OF 100 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT
SKU: n/a - Personal Care, Safety & Security
Alcoscan ALP-1 incl Printer for Industry and Law-Enforcement
Alcoscan ALP-1 is a fully portable IP54 rated water resistant Fuel Cell Sensor Industry and Law-Enforcement screener.
ALP-1 meets the EN Standard – EN 15964:2011 for Breath alcohol test devices other than single use devices.
This model includes a battery operated Mobile Folio Printer which prints results immediately upon breathalyser testing as well as captures and stores breathalyser results after each test for downloading and analysis.
Alcoscan ALP-1 contains the latest 1-Inch full size Fuel Cell Sensor providing the highest accuracy available and ethanol specific results and a long calibration cycle.
Provides both FAST no mouthpiece testing and NORMAL mouthpiece testing.
Memory: Password protected last 500 test results with date and time of each test.
This unit is suitable for Industrial and Law-Enforcement screening.
Annual Calibration is recommended.
Specifications
Annual calibration is recommended.
Category Contents Indication of B.A.C 0.000 to 4.000% or 0.000 to 0.400%BAC or 0.00 to 2.50 Mg/l BrAC by LCD display td> Accuracy +/-0.005%BAC at 0.100%BAC Mouth piece 5 full mouthpieces supplied with unit and additional mouthpieces available; 1 blow cup supplied with unit Sensor Full Size 1-Inch fully replaceable Electro-chemical Fuel Cell Sensor – Ethanol Specific Power supply Two 1.5V “AA” Alkaline batteries Weight 198g (Including batteries) – breathalyser only Dimension (mm) 133 (height) X 64 (width) X 33 Remarks – Auto power off
– Includes a Mobile Folio Printer, PC Software and Connector Cables.
– Battery Low indication
– Memory: Last 500 tests
– Meets EN Standard – EN 15964:2011
– Air flow rate checking in case of low breath volume
– Annual Calibration Reminder
– Certified Water resistant to IP54 rating IEC 60529:2001
– PASS/FAIL Fast testing set to provide FAIL from 0.01% B.A.CWE RECOMMEND THAT YOU ADD A PACK OF 100 ALP-1 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT
SKU: n/a - Personal Care, Safety & Security
Alcoscan AL5500 Personal Breathalyser
Alcoscan AL5500 is a very easy to use, reliable and
re-usable hand held personal breathalyser. It uses microcomputer control
with a 3 digit LCD display and audio cues.
The last test result and cumulative test count will be displayed when you hold the power switch down before performing a test.
The unit requires mouthpieces or drinking straws for correct operation.
This unit is suitable for personal use and not to test employees.
Annual calibration is recommended.
Specifications
Category Contents Indication of B.A.C 0.00 to 0.40% B.A.C. or mg/l equivalent by LED display Warming up Below 30 Seconds Response time Within 2 Seconds Mouth piece Yes required. (5 supplied standard). Plastic Drinking Straws can be used. Sensor Semiconductor type alcohol sensor Continuous usage Over 2 hours without battery change Power supply Two 1.5V “AA” Alkaline batteries Weight 89g (Including batteries) Dimension (mm) 110 X 46 X 20 Remarks – Auto power off
– Audible Alerts
– Battery Low indication
– Air Flow Rate Checking for correct breath sample
– Secret, sleek and simple design
– CESKU: n/a - Personal Care, Safety & Security
iBlow10 Industrial Law-Enforcement Breathalyzer BASIC PACK
iBlow10 is a high speed breathalyzer screener for testing drivers at road blocks and workers entering industrial sites.
iBlow10 has a SuraCell Fuel Cell Sensor for ethanol specific alcohol testing which provides a long calibration cycle of 1 year.
Digital Display of Test Results as well as GREEN or RED bright LED
display based on a PASS or FAIL when any amount of alcohol is detected
in breath OR based on a pre-set PASS / FAIL Limit depending on whether
iBlow10 is ordered for Industrial Use or Law-Enforcement Use.
iBlow10 provides 12 tests p/minute without the use of mouth pieces.
iBlow10 offers Active and Passive testing for when drivers or workers have difficulty exhaling.
LEDs for Night Time use with RED BLUE and BLUE ONLY options to direct drivers.
Stock Available & Price includes VAT
SKU: n/a
Related products
- Personal Care, Safety & Security
Alcoscan AL8800
Alcoscan AL8800 is a fast reacting Fuel Cell Sensor portable breathalyser.
Fuel Cell Sensor Technology provides Law-Enforcement accuracy, Ethanol Specific testing and a long calibration cycle.Alcoscan AL8800 is esay to operate, handy and compact making it suitable for personal use and in the workplace.
AL8800 also offers Passive Mode testing which provides a Pass (P) or
Fail (F) based on a preset limit of 0.02% BAC. Less than 0.02% BAC then
you Pass (P) and 0.02% BAC or above you Fail (F).
Annual calibration is recommended.
Category Contents Indication of B.A.C 1) Normal Mode: 0.00 to 0.40% B.A.C. or mg/l equivalent by LED display td> Accuracy +/- 10% at 0.050%BAC Mouth piece 5 supplied with unit and additional mouthpieces available Sensor Fuel Cell Alcohol Sensor Power supply Two 1.5V “AAA” Alkaline batteries – Two Supplied with unit Weight 83g (Including batteries) Dimension (mm) (height) X 54 (width) X 18 Remarks Auto power off
– Battery Low indication
– CE, FDA approval
– Air flow rate checkingINCLUDES A POUCH & CARRY CASE & WE RECOMMEND THAT YOU ADD A PACK OF 100 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT
SKU: n/a - Personal Care, Safety & Security
Alcoscan Entrance Breathalyser System EBS010
Alcoscan EBS010 is a high speed automatic industrial breathalyser that is used to check the breath of workers for alcohol at Turn Stile gates and Entrances to sites, offices, mines, refineries and warehouses.
Result outputs are provided by a 12V 1 sec pulse separate for Pass and Fail and by digital USB output in PC mode.
If Dry Contact Relay OUTPUT for Pass and Fail is required an optional extra Relay Box is available.
A Pass result allows access and a Fail result prevents access. Breath tests are ethanol specific and EBS010 performs over 600 tests per hour. Alcoscan EBS010 is built for Industrial and High Security environments.
Annual calibration is recommended.
Specifications
Annual calibration is recommended.
Category Contents Indication of B.A.C 1) Pass is below 0.01% B.A.C. Fail can be set to fail from 0.01% B.A.C and up Accuracy +/-0.005%BAC at 0.100%BAC Mouth piece No Mouthpiece required Sensor Replaceable fuel cell type alcohol sensor Power supply 12VDC 1.5A power supply required – Supplied Standard Weight 550g Dimension (mm) 205 (height) X 108 (width) X 95 Remarks Auto power off
– Air flow rate checking for no blows
– Calibrated to fail from 0.01% B.A.C to prevent access at the lowest possible BrAC levels
– Pricing excludes installation costs
– Time keeping and attendance technicians can easily installSKU: n/a - Personal Care, Safety & Security
Alcoscan AL2500 Elite Personal Breathalyser
Alcoscan AL2500 is a very easy to use, reliable and re-usable hand held personal
breathalyser. It uses microcomputer control with a 3 digit LCD display and audio cues.
This unit is suitable for personal use only and not to test employees.
Annual calibration is recommended.
Specifications
Category
Contents
Indication of B.A.C
0.00 to 0.40% B.A.C. or mg/l equivalent by LED display
Warming up
Below 30 Seconds
Response time
Within 2 Seconds
Mouth piece
None required
Sensor
Semiconductor type alcohol sensor
Continuous usage
Over 2 hours without battery recharge
Power supply
Two 1.5V “AA” Alkaline batteries
Weight
85g (Including batteries)
Dimension (mm)
104 X 40 X 20
Remarks
– Auto power off
– Battery Low indication
– Air Flow Rate Checking
– CE, FDA approval
SKU: n/a
There are no reviews yet.