-39%
Personal Care, Safety & Security
Alcoscan AL9000 / AL9010 including Printer
Alcoscan AL9000 / AL9010 including Mobile Printer is a
high quality hand held, portable Fuel Cell Sensor alcohol tester used to
check breath alcohol concentration with Law-Enforcement accuracy.
AL9000P interfaces with and is supplied with a portable battery operated
folio printer and is also 12V operated for the capturing and printing
of breathalyser test results when performing an alcohol test in a
work-place, at a site or on the road.
AL9000P / AL9010 houses the latest Fuel Cell Sensor Technology providing
the highest accuracy available with a long calibration cycle.
MEMORY FUNCTION:
AL9000P / AL9010 Breathalyser unit displays the last test result
AL9000P / AL9010 Printer stores the last 100 tests result (date, time,
test result) and you can print out the last 100 test results on paper
only.
This unit is suitable for use in the workplace
Specifications
Annual calibration is recommended.
| Category | Contents |
| Indication of B.A.C | 1) Normal Mode: 0.00 to 0.40% B.A.C. or mg/l equivalent by LED display td> |
| Accuracy | +/-0.005%BAC at 0.100%BAC |
| Mouth piece | 5 supplied with unit and additional mouthpieces available |
| Sensor | Electro-chemical Fuel Cell Type Alcohol Sensor |
| Power supply | Two 1.5V “AAA” Alkaline batteries – Two Supplied with unit |
| Weight | 115g (Including batteries) |
| Dimension (mm) | 124 (height) X 56 (width) X 41 |
| Remarks | Auto power off – Battery Low indication – CE, FDA approval – Air flow rate checking – Battery and 12V operated portable folio printer included WE RECOMMEND THAT YOU ADD A PACK OF 100 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT |
₵5,220.00 ₵8,500.00
Vendor Information
- Store Name: Alcohol Breathalysers
- Vendor: Alcohol-Breathalysers
- Address: P.o box 13095
Accra
Great Accra Region - No ratings found yet!
- Safety & Security
Alcoscan Entrance Breathalyser System EBS010 Sensor Modules
AEntrance Breathalyser System (EBS010) Spare Sensor Modules for quick exchange and replacement of sensors on site without the requirement for immediately servicing and calibration.
Saves times and means that EBS010 never has to leave your site when calibration of the sensor is required.
Always order a spare sensor module when ordering an EBS010 so that you never have any down-time.
SKU: n/a - Personal Care, Safety & Security
Alcoscan AL1100F VuvuThela Industry Breathalyser
Alcoscan AL1100F is a highly sensitive breathalyzer screener for testing the breath of drivers and workers entering sites.
AL1100F has a Fuel Cell Sensor for ethanol specific alcohol testing and provides a long calibration cycle of 1 year before requiring calibration.
Alcoscan AL1100F permits approximately 12 tests per minute without the use of mouth pieces.
AL1100F provides both Active and Passive testing with Passive testing being effective when drivers or workers have difficulty exhaling.
Annual calibration is recommended.
Category Contents
Indication of B.A.C – PASS 0.000 to 0.009 B.A.C. indicated by GREEN LED
– WARNING / LOW 0.01 to 0.049% B.A.C. indicated by AMBER LED
– FAIL at 0.05 % B.A.C and above indicated by RED LED – On or Over Legal Driving Limit in South Africa -These limits are adjustable to your requirements.
Accuracy +/-0.005%BAC at 0.100%BAC Mouth piece No Mouthpiece Required – No Touch Design Sensor Type Electro-chemical Fuel Cell Alcohol Sensor – Ethanol Specific Power supply 12V AC fully rechargeable unit. 12V Power Supply included and In-car charger included Weight 180g Dimension (mm) 150 (height) X 75 (width) X 24 Notes – Auto power off, Battery Low Indication and fully re-chargeable.
– Robust Silicone Skin with magnet provided standard
– Air flow rate checking for no blows
– For Law-Enforcement AL1100F is Calibrated to Warn (Amber) at Professional Driver Legal Limit of 0.02%B.A.C (0.10Mg/l BrAC & Fail (Red) at Legal Limit of 0.05%B.A.C (0.24Mg/ BrAC)SKU: n/a - Personal Care, Safety & Security
Alcoscan Entrance Breathalyser System EBS010 – INSTALLED
Alcoscan EBS010 is a high speed automatic industrial breathalyser that is used to check the breath of workers for alcohol at Turn Stile gates and Entrances to sites, offices, mines, refineries and warehouses.
Result outputs are provided by a 12V 1 sec pulse separate for Pass and Fail and by digital USB output in PC mode.
If Dry Contact Relay OUTPUT for Pass and Fail is required an optional extra Relay Box is available.
A Pass result allows access and a Fail result prevents access. Breath tests are ethanol specific and EBS010 performs over 600 tests per hour. Alcoscan EBS010 is built for Industrial and High Security environments.
Annual calibration is recommended.
This is the Installed Option.
Specifications
Annual calibration is recommended.
Category Contents Indication of B.A.C 1) Pass is below 0.01% B.A.C. Fail can be set to fail from 0.01% B.A.C and up Accuracy +/-0.005%BAC at 0.100%BAC Mouth piece No Mouthpiece required Sensor Replaceable fuel cell type alcohol sensor Power supply 12VDC 1.5A power supply required – Supplied Standard Weight 550g Dimension (mm) 205 (height) X 108 (width) X 95 Remarks – Auto power off
– Air flow rate checking for no blows
– Calibrated to fail from 0.01% B.A.C to prevent access at the lowest possible BrAC levels
– Pricing excludes travel expenses to and from Sites
– This pricing includes Installation in Series with a Turnstile Gate or Mag-Locking Gate and not full integration into a Time-Keeping SystemSKU: n/a - Personal Care, Safety & Security
Alcoscan AL5500 Personal Breathalyser
Alcoscan AL5500 is a very easy to use, reliable and
re-usable hand held personal breathalyser. It uses microcomputer control
with a 3 digit LCD display and audio cues.
The last test result and cumulative test count will be displayed when you hold the power switch down before performing a test.
The unit requires mouthpieces or drinking straws for correct operation.
This unit is suitable for personal use and not to test employees.
Annual calibration is recommended.
Specifications
Category Contents Indication of B.A.C 0.00 to 0.40% B.A.C. or mg/l equivalent by LED display Warming up Below 30 Seconds Response time Within 2 Seconds Mouth piece Yes required. (5 supplied standard). Plastic Drinking Straws can be used. Sensor Semiconductor type alcohol sensor Continuous usage Over 2 hours without battery change Power supply Two 1.5V “AA” Alkaline batteries Weight 89g (Including batteries) Dimension (mm) 110 X 46 X 20 Remarks – Auto power off
– Audible Alerts
– Battery Low indication
– Air Flow Rate Checking for correct breath sample
– Secret, sleek and simple design
– CESKU: n/a
Related products
- Personal Care, Safety & Security
Alcoscan ALP-1 incl Printer for Industry and Law-Enforcement
Alcoscan ALP-1 is a fully portable IP54 rated water resistant Fuel Cell Sensor Industry and Law-Enforcement screener.
ALP-1 meets the EN Standard – EN 15964:2011 for Breath alcohol test devices other than single use devices.
This model includes a battery operated Mobile Folio Printer which prints results immediately upon breathalyser testing as well as captures and stores breathalyser results after each test for downloading and analysis.
Alcoscan ALP-1 contains the latest 1-Inch full size Fuel Cell Sensor providing the highest accuracy available and ethanol specific results and a long calibration cycle.
Provides both FAST no mouthpiece testing and NORMAL mouthpiece testing.
Memory: Password protected last 500 test results with date and time of each test.
This unit is suitable for Industrial and Law-Enforcement screening.
Annual Calibration is recommended.
Specifications
Annual calibration is recommended.
Category Contents Indication of B.A.C 0.000 to 4.000% or 0.000 to 0.400%BAC or 0.00 to 2.50 Mg/l BrAC by LCD display td> Accuracy +/-0.005%BAC at 0.100%BAC Mouth piece 5 full mouthpieces supplied with unit and additional mouthpieces available; 1 blow cup supplied with unit Sensor Full Size 1-Inch fully replaceable Electro-chemical Fuel Cell Sensor – Ethanol Specific Power supply Two 1.5V “AA” Alkaline batteries Weight 198g (Including batteries) – breathalyser only Dimension (mm) 133 (height) X 64 (width) X 33 Remarks – Auto power off
– Includes a Mobile Folio Printer, PC Software and Connector Cables.
– Battery Low indication
– Memory: Last 500 tests
– Meets EN Standard – EN 15964:2011
– Air flow rate checking in case of low breath volume
– Annual Calibration Reminder
– Certified Water resistant to IP54 rating IEC 60529:2001
– PASS/FAIL Fast testing set to provide FAIL from 0.01% B.A.CWE RECOMMEND THAT YOU ADD A PACK OF 100 ALP-1 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT
SKU: n/a - Personal Care, Safety & Security
Alcoscan Interlock Breathalyser ALX1000
Alcoscan ALX1000 is an Electrochemical Fuel Cell sensor based interlock breathalyser supplied with an ignition interlock for connecting to the ignition of a motor vehicle, bus or truck.
After getting into the vehicle with the ALX1000 installed, the driver is required to blow into the breathalyser to be tested for alcohol. Depending on the result of analysis the ignition interlock will allow the vehicle to start or not.
Alcoscan ALX1000 is suitable for trucks, busses, taxis and fleet managed vehicles to ensure that drivers do not drive while under the influence of alcohol.
This system can be incorporated with the tracking systems for vans, busses and trucks.
Annual calibration is recommended.
Specifications
Annual calibration is recommended.
Category Contents Indication of B.A.C 0.00 to 0.40% B.A.C. or mg/l equivalent by LED display Accuracy +/-0.005%BAC at 0.100%BAC Mouth piece 5 full mouthpieces supplied with unit and additional mouthpieces available; 1 blow cup supplied with unit Sensor Fuel Cell type alcohol sensor Power supply Two 1.5V “AA” Alkaline batteries and power when connected to Interlock Device Weight 100g (Including batteries) Dimension (mm) 105 (height) X 50 (width) X 18 Remarks Auto power off
– Battery Low indication
– CE, FDA approval
– Air flow rate checkingThe Interlock device can be installed by an auto electrician and the pricing given does not include any installation costs.
WE RECOMMEND THAT YOU ADD A PACK OF 100 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT
SKU: n/a - Personal Care, Safety & Security
Alcoscan Entrance Breathalyser System EBS010
Alcoscan EBS010 is a high speed automatic industrial breathalyser that is used to check the breath of workers for alcohol at Turn Stile gates and Entrances to sites, offices, mines, refineries and warehouses.
Result outputs are provided by a 12V 1 sec pulse separate for Pass and Fail and by digital USB output in PC mode.
If Dry Contact Relay OUTPUT for Pass and Fail is required an optional extra Relay Box is available.
A Pass result allows access and a Fail result prevents access. Breath tests are ethanol specific and EBS010 performs over 600 tests per hour. Alcoscan EBS010 is built for Industrial and High Security environments.
Annual calibration is recommended.
Specifications
Annual calibration is recommended.
Category Contents Indication of B.A.C 1) Pass is below 0.01% B.A.C. Fail can be set to fail from 0.01% B.A.C and up Accuracy +/-0.005%BAC at 0.100%BAC Mouth piece No Mouthpiece required Sensor Replaceable fuel cell type alcohol sensor Power supply 12VDC 1.5A power supply required – Supplied Standard Weight 550g Dimension (mm) 205 (height) X 108 (width) X 95 Remarks Auto power off
– Air flow rate checking for no blows
– Calibrated to fail from 0.01% B.A.C to prevent access at the lowest possible BrAC levels
– Pricing excludes installation costs
– Time keeping and attendance technicians can easily installSKU: n/a
There are no reviews yet.