Product Details
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking.
Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc.
Features:
– compact and light
– high welding current stability in spite of mains voltage fluctuations
– arc force, hot start, and anti-stick devices
– thermostatic, overvoltage, under-voltage, overcurrent, motor-generator (+/- 15%) protections.
Complete with MMA welding accessories.
Original price was: ₵10,876.80.₵9,766.40Current price is: ₵9,766.40.
MOTORGENERATOR MINIMUM POWER 10 kW
SINGLE PHASE MAINS VOLTAGE 230 V
EFFICIENCY 92 %
MAINS FREQUENCY 50 / 60 Hz
POWER FACTOR (cosphi) 0,7
CURRENT RANGE 20 – 200 A
D. USABLE ELECTRODES IN DC 1,6 – 4 mm
MAX CURRENT DC (EN 60974-1) 200 @ 35 % A
PROTECTION DEGREE IP23
DC CURRENT 140 A
DIMENSIONS 40 x 14,5 x 24 cm
MAX NO LOAD VOLTAGE 60 V
MAX ABSORBED CURRENT 36 A
ABSORBED CURRENT AT 60% – MAX 24 A
MAX ABSORBED POWER 6 kW
ABSORBED POWER AT 60% 4 kWMilwaukee NRG Kit 2 Pc M18B4| 1 Pc M12B4| 1 Pc M1218FC – M18NRG 902
M18 B9 – M18™ 9.0 Ah battery
M12-18 C – M12™-M18™ multi-voltage charger
Product Details
World’s first free-standing drum machine on an 18V battery, with electronic foot pedal and integrated drum brake that electronically slows drum super-fast for more control and safety
M18 FUEL™ SWITCH PACK™ tool-free sectional drum connection system allows users to quickly interchange between cable sizes, 8 mm, 10 mm, 13 mm inner core and 16 mm open wind spirals, or add a second drum to reach 30 m down the line
Built-in backpack straps allow the user to carry their drive unit separate from their drum(s) for easier transport to any roof, drain, crawl space, or cleanout
Integrates three MILWAUKEE®-exclusive technologies – the POWERSTATE™ brushless motor, REDLITHIUM™ battery pack, and REDLINK PLUS™ intelligence hardware and software – which deliver outstanding power, run time and durability on the job site
The M18™ SWITCH PACK™ incorporates fully enclosed drums to eliminate free-spinning parts, providing the user with more protection whilst working in and around fragile fixtures as well as better mess containment whilst unclogging drains
Flexible battery system: works with all MILWAUKEE® M18™ batteries
On-tool accessory attachment storage allows the user to keep all their drums and accessories stored together
The M18™ SWITCH PACK™ is upgradable to a drum machine with automatic feed and retract, sold separately
Product Details
Compatible with Milwaukee® M18 FUEL™ outdoor powerhead QUIK-LOK™ attachment system
Easily adds an additional 91 cm reach to Milwaukee® outdoor powerhead chainsaw and hedge trimmer attachments making the tool much safer to use without the need for a ladder
Product Details
M18 FIWF12 – M18 FUEL™ ½″ impact wrench with friction ring
M18 CHX – M18 FUEL™ SDS plus hammer
M18 CAG125XPDB – M18 FUEL 12 5mm angle grinder
Milwaukee® TICK – Bluetooth® tracking module
PACKOUT™ trolley box
Product Details
Electronic BATTERY MANAGER for total maintenance of
WET, GEL, AGM, MF, PbCa, EFB und Li batteries at 6/12/24V, and for support activities when intervening on vehicles in workshops, repair shops, and car dealer premises.
The innovative Power Stream technology guarantees better performance, up to 50% more than traditional battery chargers.
The Pulse Tronic technology guarantees optimal battery charging over 8 phases.
Doctor Charge 50 carries out 5 functions:
1. automatic charge and maintenance of batteries with PULSE TRONIC technology, even in difficult environmental conditions (low temperatures);
2. battery tests such as the voltage at terminals, starting capacity (CCA), and operational check of the vehicle alternator;
3. recovery of sulfated or very discharged batteries, and recovery of optimal operation with periodic regeneration;
4. stable power supply source for battery changes (to protect the on-board electronics), for diagnostic activities (operation checks carried out on the vehicles), for keeping the batteries of display vehicles in showrooms operational;
5. vehicles start aid.
Based on the SMPS (Switch Mode Power Supply) Technology. In the case of black-outs or repetitive uses, Doctor Charge 50 can set itself at the last settings carried out, furthermore, the cables can be calibrated according to their type (different lengths and/or sections).
Many protections are available. Fit with the PFC device
Product Details
MMA and TIG inverter, electrode welding machine in direct current (DC) with scratch striking. Use with a wide range of electrodes: rutile, basic, stainless steel, cast iron, etc. Features:- compact and light- high welding current stability in spite of mains voltage fluctuations- arc force, hot start, and anti-stick devices- thermostatic, overvoltage, under-voltage, overcurrent, motor-generator (+/- 15%) protections.
No account yet?
Create an Account
