Showing 1–9 of 152 results
Shopbeta Power & Hand Tools
Wide Selection of Ingco Power & Hand Tools in Ghana – Enjoy Best Online Shopping Experience with Shopbeta Ghana – Fast Delivery – Cash on Delivery.
Milwaukee Force Logic Hydraulic Underground Cable Cutter 18V – M18 HCC75R-502C
₵128,918.40Product Details
FORCE LOGIC™ hydraulic remote underground cable cutter cuts cables in less than 10 seconds with 77.8 kN of force
The wireless remote communicates with the tool via a mutually exclusive Bluetooth® connection, removing any physical connection to the tool and allowing Linemen to make remote cuts WIRELESSLY
Balanced design, handle and hang hook enable the easiest set-up in vaults
Cuts aluminum & copper cables up to 75 mm
Green LED light on wireless remote gives positive indication that the tool is done cutting
Converts from Local to Remote cutting mode easily
The open-jaw design provides the easiest access in trenches
POWERSTATE™ brushless motor provides increased efficiency, lasts longer and delivers maximum power
ONE-KEY™ technology allows linemen to view tool usage, receive notifications for recommended maintenance, and sync information wirelessly to the cloud
ONE-KEY™ tool tracking & security offers a cloud-based inventory management platform that supports both location tracking and theft prevention
REDLINK™ individual battery cell monitoring optimizes tool run time and ensures long term pack durability
REDLITHIUM™ battery pack provides superior pack construction, electronics, and fade-free performance to deliver more run time and more work over pack life
Flexible battery system: works with all MILWAUKEE® M18™ batteries
Milwaukee MX Fuel Breaking Hammer 25KG With Trolley 2Chisels – MXF DH2528H
₵123,648.00- The industry’s first cordless 28 mm Hex demolition hammer, delivering the power of petrol, corded and pneumatic
- Heavy Duty hammer provides 64 blow Joules of impact energy for toughest demolition applications
- Floating body anti-vibration technologies allows the user to work all day without reaching dangerous exposure levels
- Low 5.17 m/s² vibrations for over 7 hrs (HAVS) non-stop productivity
- Fast material removal at 1300 BPM, providing maximum productivity in all applications
- Breaks up to 2 tons of concrete or a 12 m (20 cm deep and 30 cm wide) trench on 1 x MXF XC406 battery
- AC-equivalent tool life and service-friendly with an integrated service indicator light alerting the user every 40 hours to add grease
- MX FUEL™ next-generation POWERSTATE™ brushless motor, REDLINK PLUS™ electronics and REDLITHIUM™ battery packs deliver superior performance, durability and run time in high demand applications
- ONE-KEY™ tool tracking & security offers a cloud-based inventory management platform that supports both location tracking and theft prevention
- Separately available trolley DHT MXF with 4 chisel storage locations, charger and battery storage, and hammer retention strap to easily transport the tool on the job site
- Supplied with 1 x 28 mm Hex pointed chisel, 1 x 28 mm Hex 35 mm flat chisel
SUPERIOR 630 CE VRD
₵105,587.20Product Details
MMA, TIG-LIFT in direct current (DC), multiprocess, inverter welding machine with microprocessor control, designed for welding cellulosic electrodes and coated electrodes such as aluminium, rutile, basic, stainless steel, cast iron with diameter up to 8 mm.
Superior 630 CE VRD has the “gouging” function and makes it possible MIG-MAG/FLUX welding with an optional feeder.
Features:
– reduced weight and dimensions
– high welding current stability despite mains voltage fluctuations
– immediate control of the welding droplets transfer
– regulation of arc force and hot start according to the type of electrode in use
– anti-stick device
– VRD device
– storage on onboard E2PROM of the last 9 alarms
– remote control connector
– thermostatic, overvoltage, under-voltage, overcurrent, motor-generator (+/- 15%) protections.
ELECTROMIG 400 SYNERGIC
₵97,144.83ELECTROMIG 400 SYNERGIC
Product Details
MIG-MAG/FLUX/BRAZING/MMA and TIG DC-Lift multiprocess inverter welding machine controlled by a microprocessor, with a 4-roller wire feeder.
Flexible use with various welded materials (steel, stainless steel, aluminium) or brazed materials (galvanized sheet metal). Wide variety of application fields, from industry to maintenance, installation to bodywork activities. The synergic adjustment makes the product simple to use. The Made in Telwin ATC technology makes it easy to achieve excellent standards of welding on thin materials thanks to state-of-the-art control of the arc.
Features:
– Manual or synergic operating;
– 40 pre-set synergic curves;
– Possibility of creating, saving, and retrieving customized welding programs;
– MIG-MAG adjustments: wire upslope, electronic reactance, wire burn-back time, post gas;
– 2/4 time operation selection, Bi-Level, spot, inch and mm material thicknesses;
– Adjustments in MMA: hot start, arc force, anti-stick;
– VRD selection.
– Protections: thermostatic, overvoltage, under-voltage, overcurrent, engine-driven generator (+/-15%);
– TIG Lift
Complete with MIG-MAG torch, cable, and earth clamp.
Milwaukee MX Fuel Diamond Core Drill 150MM – MXF DCD150-601C
₵82,700.80Product Details
- Core with confidence by delivering AC performance with a maximum core diameter capacity of 152 mm wet & dry
- 2-speed gearing for a wide range of applications, with laser, edged speed, and capacity markings into the metal body
- Speed 1: up to 75 mm diameter wet & dry coring at 1600 Rpm
- Speed 2: 76 to 152 mm diameter wet & dry coring 800 rpm
- Patented AUTOSTOP™ clutch provides best in class protection, preventing over-rotating when losing control or in case of a stuck core
- On-board level sensor guides the user to achieve a straight and accurate finish whilst horizontal drilling
- The on-board pressure gauge allows users to optimize drilling speed to get the best lifetime of machine and accessory
- On-board battery gauge allows the user to monitor battery capacity during the entire drilling process
- Integrated water line for wet coring that is compatible with the M18™ SWITCH TANK™ interchangeable sprayer and water supply system
- 1 ¼″UNC + ¼″G core fitting to fit most common cores, with friction plate design allowing for easy core changes
- Separately available core drill stand MXF DR150 with 60 mm collar – 60 mm mount on the core drill fits most universal core stands
- MX FUEL™ next-generation POWERSTATE™ brushless motor, REDLINK PLUS™ electronics, and REDLITHIUM™ battery pack deliver superior performance, durability, and run time in high demand applications
- ONE-KEY™ tool tracking & security offers a cloud-based inventory management platform that supports both location tracking and theft prevention
Milwaukee MX Fuel Cut-Off Saw 350MM – MXF COS350-601
₵76,876.80Product Details
- The world’s first 350 mm battery-powered cut-off saw to deliver the power to cut reinforced concrete with a full 350 mm cut capacity
- Faster cuts, start to finish: 3-second push-button startup eliminates the need to mix petrol and oil and avoids petrol engine maintenance
- No petrol headaches: Can be used indoors due to zero fume emissions
- Petrol-equivalent performance with a maximum no-load speed of 5370 rpm and a full 125 mm depth of cut
- Quieter than other petrol equivalent saws, with low engine vibration and well-balanced weight
- Keyless adjustable blade guard & onboard water line for wet cutting which is compatible with the M18™ SWITCH TANK™ interchangeable sprayer and water supply system
- Separately available cut-off saw cart MXF COSC maintain straight cuts
- MX FUEL™ next-generation POWERSTATE™ brushless motor, REDLINK PLUS™ electronics, and REDLITHIUM™ battery pack deliver superior performance, durability, and run time in high demand applications
- ONE-KEY™ tool tracking & security offers a cloud-based inventory management platform that supports both location tracking and theft prevention
- Supplied with DUH 350 mm diamond blade, contractor bag for batteries, and charger
SUPERIOR 400 CE VRD
₵75,961.60Product Details
MMA, TIG-LIFT in direct current (DC), multiprocess, inverter welding machine with microprocessor control, designed for welding cellulosic electrodes and coated electrodes such as aluminium, rutile, basic, stainless steel, cast iron with diameter up to 6 mm.
Superior 400 CE VRD has the “gouging” function and makes it possible MIG-MAG/FLUX welding with optional feeder for industrial applications on steels and steel by-products.
Features:
– reduced weight and dimensions
– high welding current stability despite mains voltage fluctuations
– immediate control of the welding droplets transfer
– regulation of arc force and hot start according to the type of electrode in use
– anti-stick device
– VRD device
– storage on onboard E2PROM of the last 10 alarms
– remote control connector
– thermostatic, overvoltage, under-voltage, overcurrent, motor-generator (+/- 15%) protections.
Milwaukee Force Logic Hydraulic Knockout Punch 18V – M18 HKP-201CA
₵55,884.80FORCE LOGIC™ hydraulic knockout punch is the most compact and lightweight tool on the market with 60 kN of force
The easiest way to punch – for fast, accurate, round, and burr-free holes
Highest accuracy due to the industry’s finest exact alignment system for dies
Best balanced tool and easiest control due to one-hand operation
The quick connector allows easy set-up of punch and die without carrying the weight of the tool
Tool punches up to ø100 mm holes into 3.0 mm mild steel or 2.5 mm stainless steel
Compatible with most common punches and dies available on the market
Easiest, less strenuous and nonexpendable way of making holes into sheet metal
Onboard fuel gauge and LED light
REDLINK™ individual battery cell monitoring optimizes tool run time and ensures long term pack durability
REDLITHIUM™ battery pack provides superior pack construction, electronics, and fade-free performance to deliver more run time and more work over pack life
Flexible battery system: works with all MILWAUKEE® M18™ batteries
Milwaukee Breaking Hammer 25 KG – K 2500 H
₵53,486.00Product Details
Milwaukee Breaking Hammer 25 KG – K 2500 H:
Heavy Duty breaker provides 64 blow Joules of impact energy for toughest demolition applications
Floating body anti-vibration technologies allows the user to work all day without reaching dangerous exposure levels
The additional third handle gives maximum control when lifting the breaker between applications
1300 BPM provides maximum productivity in all applications
Brushless motor allows for the maximum run time in-between service intervals
10 m cable allows for a working area of up to 314 m²
28 mm Hex reception
Separately available trolley with 4 chisel location and cable management makes it easy to transport breaker on the job site