Showing 19–27 of 326 results
Product Details
Alcoscan ALP-1 is a fully portable IP54 rated water resistant Fuel Cell Sensor Industry and Law-Enforcement screener.
ALP-1 meets the EN Standard – EN 15964:2011 for Breath alcohol test devices other than single use devices.
This model includes a battery operated Mobile Folio Printer which prints results immediately upon breathalyser testing and captures and stores breathalyzer results after each test for downloading and analysis.
Alcoscan ALP-1 contains the latest 1-Inch full-size Fuel Cell Sensor providing the highest accuracy available and ethanol-specific results and a long calibration cycle.
Provides both FAST no mouthpiece testing and NORMAL mouthpiece testing.
Memory: Password protected last 500 test results with the date and time of each test.
This unit is suitable for Industrial and Law-Enforcement screening.
Annual Calibration is recommended.
Specifications
Annual calibration is recommended.
| Category | Contents |
| Indication of B.A.C | 0.000 to 4.000% or 0.000 to 0.400%BAC or 0.00 to 2.50 Mg/l BrAC by LCD display td> |
| Accuracy | +/-0.005%BAC at 0.100%BAC |
| Mouth piece | 5 full mouthpieces supplied with unit and additional mouthpieces available; 1 blow cup supplied with unit |
| Sensor | Full Size 1-Inch fully replaceable Electro-chemical Fuel Cell Sensor – Ethanol Specific |
| Power supply | Two 1.5V “AA” Alkaline batteries |
| Weight | 198g (Including batteries) – breathalyser only |
| Dimension (mm) | 133 (height) X 64 (width) X 33 |
| Remarks | – Auto power off – Includes a Mobile Folio Printer, PC Software and Connector Cables. – Battery Low indication – Memory: Last 500 tests – Meets EN Standard – EN 15964:2011 – Air flow rate checking in case of low breath volume – Annual Calibration Reminder – Certified Water resistant to IP54 rating IEC 60529:2001 – PASS/FAIL Fast testing set to provide FAIL from 0.01% B.A.CWE RECOMMEND THAT YOU ADD A PACK OF 100 ALP-1 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT |
Product Details
Alcoscan ALP-1 BT is a fully portable IP54-rated water-resistant Fuel Cell Sensor Industry and Law-Enforcement screener.
ALP-1 meets the EN Standard – EN 15964:2011 for Breath alcohol test devices other than single-use devices.
This model includes a battery-operated Mobile Folio Printer which prints results immediately upon breathalyzer testing and captures and stores breathalyzer results after each test for downloading and analysis.
Alsoscan ALP-1 contains the latest 1-Inch full-size Fuel Cell Sensor providing the highest accuracy available and ethanol-specific results and a long calibration cycle.
Provides both FAST no mouthpiece testing and NORMAL mouthpiece testing.
Memory: Password protected last 500 test results with the date and time of each test.
This unit is suitable for Industrial and Law-Enforcement screening.
Annual Calibration is recommended.
Specifications
Annual calibration is recommended.
| Category | Contents |
| Indication of B.A.C | 0.000 to 4.000% or 0.000 to 0.400%BAC or 0.00 to 2.50 Mg/l BrAC by LCD display td> |
| Accuracy | +/-0.005%BAC at 0.100%BAC |
| Mouth piece | 5 full mouthpieces supplied with unit and additional mouthpieces available; 1 blow cup supplied with unit |
| Sensor | Full Size 1-Inch fully replaceable Electro-chemical Fuel Cell Sensor – Ethanol Specific |
| Power supply | Two 1.5V “AA” Alkaline batteries |
| Weight | 198g (Including batteries) – breathalyzer only |
| Dimension (mm) | 133 (height) X 64 (width) X 33 |
| Remarks | – Auto power off – Includes a Mobile Folio Printer, PC Software and Connector Cables. – Battery Low indication – Memory: Last 500 tests – Meets EN Standard – EN 15964:2011 – Air flow rate checking in case of low breath volume – Annual Calibration Reminder – Certified Water resistant to IP54 rating IEC 60529:2001 – PASS/FAIL Fast testing set to provide FAIL from 0.01% B.A.CWE RECOMMEND THAT YOU ADD A PACK OF 100 ALP-1 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT |
Alcoscan AL2500 Elite Personal Breathalyser
Alcoscan AL2500 is a very easy-to-use, reliable, and re-usable handheld personal
breathalyzer. It uses microcomputer control with a 3-digit LCD and audio cues.
This unit is suitable for personal use only and not to test employees.
Annual calibration is recommended.
Specifications
Category
Contents
Indication of B.A.C
0.00 to 0.40% B.A.C. or mg/l equivalent by LED display
Warming up
Below 30 Seconds
Response time
Within 2 Seconds
Mouthpiece
None required
Sensor
Semiconductor type alcohol sensor
Continuous usage
Over 2 hours without battery recharge
Power supply
Two 1.5V “AA” Alkaline batteries
Weight
85g (Including batteries)
Dimension (mm)
104 X 40 X 20
Remarks
– Auto power off
– Battery Low indication
– Air Flow Rate Checking
– CE, FDA approval
Alcoscan EBS010 is a high speed automatic industrial breathalyser that is used to check the breath of workers for alcohol at Turn Stile gates and Entrances to sites, offices, mines, refineries and warehouses.
Result outputs are provided by a 12V 1 sec pulse separate for Pass and Fail and by digital USB output in PC mode.
If Dry Contact Relay OUTPUT for Pass and Fail is required an optional extra Relay Box is available.
A Pass result allows access and a Fail result prevents access. Breath tests are ethanol specific and EBS010 performs over 600 tests per hour. Alcoscan EBS010 is built for Industrial and High Security environments.
Annual calibration is recommended.
Specifications
Annual calibration is recommended.
| Category | Contents |
| Indication of B.A.C | 1) Pass is below 0.01% B.A.C. Fail can be set to fail from 0.01% B.A.C and up |
| Accuracy | +/-0.005%BAC at 0.100%BAC |
| Mouth piece | No Mouthpiece required |
| Sensor | Replaceable fuel cell type alcohol sensor |
| Power supply | 12VDC 1.5A power supply required – Supplied Standard |
| Weight | 550g |
| Dimension (mm) | 205 (height) X 108 (width) X 95 |
| Remarks | Auto power off – Air flow rate checking for no blows – Calibrated to fail from 0.01% B.A.C to prevent access at the lowest possible BrAC levels – Pricing excludes installation costs – Time keeping and attendance technicians can easily install |
Alcoscan EBS010 is a high speed automatic industrial breathalyser that is used to check the breath of workers for alcohol at Turn Stile gates and Entrances to sites, offices, mines, refineries and warehouses.
Result outputs are provided by a 12V 1 sec pulse separate for Pass and Fail and by digital USB output in PC mode.
If Dry Contact Relay OUTPUT for Pass and Fail is required an optional extra Relay Box is available.
A Pass result allows access and a Fail result prevents access. Breath tests are ethanol specific and EBS010 performs over 600 tests per hour. Alcoscan EBS010 is built for Industrial and High Security environments.
Annual calibration is recommended.
This is the Installed Option.
Specifications
Annual calibration is recommended.
| Category | Contents |
| Indication of B.A.C | 1) Pass is below 0.01% B.A.C. Fail can be set to fail from 0.01% B.A.C and up |
| Accuracy | +/-0.005%BAC at 0.100%BAC |
| Mouth piece | No Mouthpiece required |
| Sensor | Replaceable fuel cell type alcohol sensor |
| Power supply | 12VDC 1.5A power supply required – Supplied Standard |
| Weight | 550g |
| Dimension (mm) | 205 (height) X 108 (width) X 95 |
| Remarks | – Auto power off – Air flow rate checking for no blows – Calibrated to fail from 0.01% B.A.C to prevent access at the lowest possible BrAC levels – Pricing excludes travel expenses to and from Sites – This pricing includes Installation in Series with a Turnstile Gate or Mag-Locking Gate and not full integration into a Time-Keeping System |
Alcoscan ALX1000 is an Electrochemical Fuel Cell sensor based interlock breathalyser supplied with an ignition interlock for connecting to the ignition of a motor vehicle, bus or truck.
After getting into the vehicle with the ALX1000 installed, the driver is required to blow into the breathalyser to be tested for alcohol. Depending on the result of analysis the ignition interlock will allow the vehicle to start or not.
Alcoscan ALX1000 is suitable for trucks, busses, taxis and fleet managed vehicles to ensure that drivers do not drive while under the influence of alcohol.
This system can be incorporated with the tracking systems for vans, busses and trucks.
Annual calibration is recommended.
Specifications
Annual calibration is recommended.
| Category | Contents |
| Indication of B.A.C | 0.00 to 0.40% B.A.C. or mg/l equivalent by LED display |
| Accuracy | +/-0.005%BAC at 0.100%BAC |
| Mouth piece | 5 full mouthpieces supplied with unit and additional mouthpieces available; 1 blow cup supplied with unit |
| Sensor | Fuel Cell type alcohol sensor |
| Power supply | Two 1.5V “AA” Alkaline batteries and power when connected to Interlock Device |
| Weight | 100g (Including batteries) |
| Dimension (mm) | 105 (height) X 50 (width) X 18 |
| Remarks | Auto power off – Battery Low indication – CE, FDA approval – Air flow rate checking The Interlock device can be installed by an auto electrician and the pricing given does not include any installation costs. WE RECOMMEND THAT YOU ADD A PACK OF 100 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT |
Product Details:
Tube Material PVC
Usage/Application Hospital
Color Transparent
Needle Length 21G
Female Connector luer slip
Brand Other
Country of Origin Made in India
Product Details
Always Ultra Thin with Wings – Extra Long (7 pads)
• Always Ultra Thin with Flexi-Wings have a flexible design to protect comfortably and move with you
• Soft cover absorbs quickly and gives you a long-lasting clean-and-dry feeling
• Stock up on feminine pads now and save time later
No account yet?
Create an Account
