Showing 37–45 of 1055 results
Beauty & Health
Alcoscan AL8800
Alcoscan AL8800
Product Details
Alcoscan AL8800 is a fast reacting Fuel Cell Sensor portable breathalyser.
Fuel Cell Sensor Technology provides Law-Enforcement accuracy, Ethanol Specific testing and a long calibration cycle.
Alcoscan AL8800 is esay to operate, handy and compact making it suitable for personal use and in the workplace.
AL8800 also offers Passive Mode testing which provides a Pass (P) or
Fail (F) based on a preset limit of 0.02% BAC. Less than 0.02% BAC then
you Pass (P) and 0.02% BAC or above you Fail (F).
Annual calibration is recommended.
Category | Contents |
Indication of B.A.C | 1) Normal Mode: 0.00 to 0.40% B.A.C. or mg/l equivalent by LED display td> |
Accuracy | +/- 10% at 0.050%BAC |
Mouth piece | 5 supplied with unit and additional mouthpieces available |
Sensor | Fuel Cell Alcohol Sensor |
Power supply | Two 1.5V “AAA” Alkaline batteries – Two Supplied with unit |
Weight | 83g (Including batteries) |
Dimension (mm) | (height) X 54 (width) X 18 |
Remarks | Auto power off – Battery Low indication – CE, FDA approval – Air flow rate checkingINCLUDES A POUCH & CARRY CASE & WE RECOMMEND THAT YOU ADD A PACK OF 100 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT |
Where To Buy Alcoscan AL8800 in Ghana?
Alcoscan AL9000 / AL9010 Including Printer
Alcoscan AL9000 / AL9010 Including Printer
Product Details
Alcoscan AL9000 / AL9010 including Mobile Printer is a
high quality hand held, portable Fuel Cell Sensor alcohol tester used to
check breath alcohol concentration with Law-Enforcement accuracy.
AL9000P interfaces with and is supplied with a portable battery operated
folio printer and is also 12V operated for the capturing and printing
of breathalyser test results when performing an alcohol test in a
work-place, at a site or on the road.
AL9000P / AL9010 houses the latest Fuel Cell Sensor Technology providing
the highest accuracy available with a long calibration cycle.
MEMORY FUNCTION:
AL9000P / AL9010 Breathalyser unit displays the last test result
AL9000P / AL9010 Printer stores the last 100 tests result (date, time,
test result) and you can print out the last 100 test results on paper
only.
This unit is suitable for use in the workplace
Specifications
Annual calibration is recommended.
Category | Contents |
Indication of B.A.C | 1) Normal Mode: 0.00 to 0.40% B.A.C. or mg/l equivalent by LED display td> |
Accuracy | +/-0.005%BAC at 0.100%BAC |
Mouth piece | 5 supplied with unit and additional mouthpieces available |
Sensor | Electro-chemical Fuel Cell Type Alcohol Sensor |
Power supply | Two 1.5V “AAA” Alkaline batteries – Two Supplied with unit |
Weight | 115g (Including batteries) |
Dimension (mm) | 124 (height) X 56 (width) X 41 |
Remarks | Auto power off – Battery Low indication – CE, FDA approval – Air flow rate checking – Battery and 12V operated portable folio printer includedWE RECOMMEND THAT YOU ADD A PACK OF 100 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT |
Alcoscan ALC-1
Alcoscan ALC-1 is a high-end Personal, Workplace or
Law-Enforcement alcohol tester with a fast reacting Fuel Cell Alcohol
Sensor used to check breath alcohol concentration quickly and
accurately.
It offers the highest accuracy levels available for portable alcohol testers with a long calibration cycle.
ALC-1 is suitable for use in the workplace or on the roads as a screener.
Annual calibration is recommended.
Specifications
Annual calibration is recommended.
Category | Contents |
Indication of B.A.C | 1) Normal Mode: 0.00 to 0.40% B.A.C. or mg/l equivalent by LED display td> |
Accuracy | +/-0.005%BAC at 0.100%BAC |
Mouth piece | 5 supplied with unit and additional mouthpieces available |
Sensor | Fuel Cell Type Alcohol Sensor |
Power supply | Two 1.5V “AAA” Alkaline batteries – Two Supplied with unit |
Weight | 115g (Including batteries) |
Dimension (mm) | 124 (height) X 56 (width) X 41 |
Remarks | Auto power off – Battery Low indication – CE, FDA approval – Air flow rate checkingWE RECOMMEND THAT YOU ADD A PACK OF 100 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT |
Alcoscan ALP-1 for Industry and Law-Enforcement
Alcoscan ALP-1 for Industry and Law-Enforcement
Alcoscan ALP-1 is a fully portable IP54 rated water resistant Fuel Cell Sensor breathalyser for Law-Enforcement and Industry alcohol screening.ALP-1 meets the EN Standard – EN 15964:2011 for Breath Alcohol test devices other than single use devices.ALP-1 captures and stores alcohol test results after each test which can be downloaded and analysed later on a PC.Alcoscan ALP-1 contains the latest 1-Inch full size Fuel Cell Sensor providing the highest accuracy available and ethanol specific results and providing for a long calibration cycle.
Provides both FAST no mouthpiece testing and NORMAL mouthpiece testing.
Memory: Password protected last 500 test results including date and time of each test.
This unit is suitable for Industry and Law Enforcement screening.
Annual Calibration is recommended.
Specifications
Annual calibration is recommended.
Category | Contents |
Indication of B.A.C | 0.000 to 4.000% or 0.000 to 0.400%BAC or 0.00 to 2.50 Mg/l BrAC by LCD display |
Accuracy | +/-0.005%BAC at 0.100%BAC |
Mouth piece | 5 full mouthpieces supplied with unit and additional mouthpieces available; 1 blow cup supplied with unit |
Sensor | Full Size 1-Inch fully replaceable Electro-chemical Fuel Cell Sensor – Ethanol Specific |
Power supply | Two 1.5V “AA” Alkaline batteries |
Weight | 198g (Including batteries) – breathalyser only |
Dimension (mm) | 133 (height) X 64 (width) X 33 |
Remarks | Auto power off – Includes PC Software, USB Cable contained in a secure plastic carry case – Battery Low indication – Meets EN Standard – EN 15964:2011 – Air flow rate checking in case of low breath volume – Annual Calibration Reminder – Certified Water resistant to IP54 rating IEC 60529:2001 – PASS/FAIL Fast testing set to provide a Fail result from 0.01% B.A.CWE RECOMMEND THAT YOU ADD A PACK OF 100 ALP-1 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT |
Where To Buy Alcoscan ALP-1 for Industry and Law-Enforcement in Ghana?
Alcoscan ALP-1 for Industry and Law-Enforcement BT
Alcoscan ALP-1 for Industry and Law-Enforcement BT
Alcoscan ALP-1 BT is a fully portable IP54 rated water resistant Fuel Cell Sensor breathalyser for Law-Enforcement and Industry alcohol screening.
ALP-1 meets the EN Standard – EN 15964:2011 for Breath Alcohol test devices other than single use devices.
ALP-1 captures and stores alcohol test results after each test which can be downloaded and analysed later on a PC.
Alcoscan ALP-1 contains the latest 1-Inch full size Fuel Cell Sensor providing the highest accuracy available and ethanol specific results and providing for a long calibration cycle.
Provides both FAST no mouthpiece testing and NORMAL mouthpiece testing.
Memory: Password protected last 500 test results including date and time of each test.
This unit is suitable for Industry and Law Enforcement screening.
Annual Calibration is recommended.
Specifications
Annual calibration is recommended.
Category | Contents |
Indication of B.A.C | 0.000 to 4.000% or 0.000 to 0.400%BAC or 0.00 to 2.50 Mg/l BrAC by LCD display td> |
Accuracy | +/-0.005%BAC at 0.100%BAC |
Mouth piece | 5 full mouthpieces supplied with unit and additional mouthpieces available; 1 blow cup supplied with unit |
Sensor | Full Size 1-Inch fully replaceable Electro-chemical Fuel Cell Sensor – Ethanol Specific |
Power supply | Two 1.5V “AA” Alkaline batteries |
Weight | 198g (Including batteries) – breathalyser only |
Dimension (mm) | 133 (height) X 64 (width) X 33 |
Remarks | Auto power off – Includes PC Software, USB Cable contained in a secure plastic carry case – Battery Low indication – Meets EN Standard – EN 15964:2011 – Air flow rate checking in case of low breath volume – Annual Calibration Reminder – Certified Water resistant to IP54 rating IEC 60529:2001 – PASS/FAIL Fast testing set to provide a Fail result from 0.01% B.A.CWE RECOMMEND THAT YOU ADD A PACK OF 100 ALP-1 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT |
Where To Buy Alcoscan ALP-1 for Industry and Law-Enforcement BT in Ghana?
Alcoscan ALP-1 incl Printer for Industry and Law-Enforcement
Alcoscan ALP-1 incl Printer for Industry and Law-Enforcement
Product Details
Alcoscan ALP-1 is a fully portable IP54 rated water resistant Fuel Cell Sensor Industry and Law-Enforcement screener.
ALP-1 meets the EN Standard – EN 15964:2011 for Breath alcohol test devices other than single use devices.
This model includes a battery operated Mobile Folio Printer which prints results immediately upon breathalyser testing and captures and stores breathalyzer results after each test for downloading and analysis.
Alcoscan ALP-1 contains the latest 1-Inch full-size Fuel Cell Sensor providing the highest accuracy available and ethanol-specific results and a long calibration cycle.
Provides both FAST no mouthpiece testing and NORMAL mouthpiece testing.
Memory: Password protected last 500 test results with the date and time of each test.
This unit is suitable for Industrial and Law-Enforcement screening.
Annual Calibration is recommended.
Specifications
Annual calibration is recommended.
Category | Contents |
Indication of B.A.C | 0.000 to 4.000% or 0.000 to 0.400%BAC or 0.00 to 2.50 Mg/l BrAC by LCD display td> |
Accuracy | +/-0.005%BAC at 0.100%BAC |
Mouth piece | 5 full mouthpieces supplied with unit and additional mouthpieces available; 1 blow cup supplied with unit |
Sensor | Full Size 1-Inch fully replaceable Electro-chemical Fuel Cell Sensor – Ethanol Specific |
Power supply | Two 1.5V “AA” Alkaline batteries |
Weight | 198g (Including batteries) – breathalyser only |
Dimension (mm) | 133 (height) X 64 (width) X 33 |
Remarks | – Auto power off – Includes a Mobile Folio Printer, PC Software and Connector Cables. – Battery Low indication – Memory: Last 500 tests – Meets EN Standard – EN 15964:2011 – Air flow rate checking in case of low breath volume – Annual Calibration Reminder – Certified Water resistant to IP54 rating IEC 60529:2001 – PASS/FAIL Fast testing set to provide FAIL from 0.01% B.A.CWE RECOMMEND THAT YOU ADD A PACK OF 100 ALP-1 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT |
Where To Buy Alcoscan ALP-1 incl Printer for Industry and Law-Enforcement in Ghana?
Alcoscan ALP-1 incl Printer for Industry and Law-Enforcement BT
Alcoscan ALP-1 incl Printer for Industry and Law-Enforcement BT
Product Details
Alcoscan ALP-1 BT is a fully portable IP54-rated water-resistant Fuel Cell Sensor Industry and Law-Enforcement screener.
ALP-1 meets the EN Standard – EN 15964:2011 for Breath alcohol test devices other than single-use devices.
This model includes a battery-operated Mobile Folio Printer which prints results immediately upon breathalyzer testing and captures and stores breathalyzer results after each test for downloading and analysis.
Alsoscan ALP-1 contains the latest 1-Inch full-size Fuel Cell Sensor providing the highest accuracy available and ethanol-specific results and a long calibration cycle.
Provides both FAST no mouthpiece testing and NORMAL mouthpiece testing.
Memory: Password protected last 500 test results with the date and time of each test.
This unit is suitable for Industrial and Law-Enforcement screening.
Annual Calibration is recommended.
Specifications
Annual calibration is recommended.
Category | Contents |
Indication of B.A.C | 0.000 to 4.000% or 0.000 to 0.400%BAC or 0.00 to 2.50 Mg/l BrAC by LCD display td> |
Accuracy | +/-0.005%BAC at 0.100%BAC |
Mouth piece | 5 full mouthpieces supplied with unit and additional mouthpieces available; 1 blow cup supplied with unit |
Sensor | Full Size 1-Inch fully replaceable Electro-chemical Fuel Cell Sensor – Ethanol Specific |
Power supply | Two 1.5V “AA” Alkaline batteries |
Weight | 198g (Including batteries) – breathalyzer only |
Dimension (mm) | 133 (height) X 64 (width) X 33 |
Remarks | – Auto power off – Includes a Mobile Folio Printer, PC Software and Connector Cables. – Battery Low indication – Memory: Last 500 tests – Meets EN Standard – EN 15964:2011 – Air flow rate checking in case of low breath volume – Annual Calibration Reminder – Certified Water resistant to IP54 rating IEC 60529:2001 – PASS/FAIL Fast testing set to provide FAIL from 0.01% B.A.CWE RECOMMEND THAT YOU ADD A PACK OF 100 ALP-1 MOUTHPIECES TO YOUR ONLINE SHOPPING CART WHEN ORDERING OR BUYING THIS PRODUCT |
Where To Buy Alcoscan ALP-1 incl Printer for Industry and Law-Enforcement BT in Ghana?
Alcoscan Elite Personal Breathalyser (AL2500)
Buy Alcoscan Elite Personal Breathalyser
Alcoscan AL2500 Elite Personal Breathalyser
Alcoscan AL2500 is a very easy-to-use, reliable, and re-usable handheld personal
breathalyzer. It uses microcomputer control with a 3-digit LCD and audio cues.
This unit is suitable for personal use only and not to test employees.
Annual calibration is recommended.
Where to buy Alcoscan Elite Personal Breathalyser
Specifications
Category
Contents
Indication of B.A.C
0.00 to 0.40% B.A.C. or mg/l equivalent by LED display
Warming up
Below 30 Seconds
Response time
Within 2 Seconds
Mouthpiece
None required
Sensor
Semiconductor type alcohol sensor
Continuous usage
Over 2 hours without battery recharge
Power supply
Two 1.5V “AA” Alkaline batteries
Weight
85g (Including batteries)
Dimension (mm)
104 X 40 X 20
Alcoscan AL2500 Elite Personal Breathalyser
Remarks
– Auto power off
– Battery Low indication
– Air Flow Rate Checking
– CE, FDA approval
Alcoscan AL2500 Elite Personal Breathalyser
Alcoscan Entrance Breathalyser System EBS010
Alcoscan Entrance Breathalyser System EBS010
Alcoscan EBS010 is a high speed automatic industrial breathalyser that is used to check the breath of workers for alcohol at Turn Stile gates and Entrances to sites, offices, mines, refineries and warehouses.
Result outputs are provided by a 12V 1 sec pulse separate for Pass and Fail and by digital USB output in PC mode.
If Dry Contact Relay OUTPUT for Pass and Fail is required an optional extra Relay Box is available.
A Pass result allows access and a Fail result prevents access. Breath tests are ethanol specific and EBS010 performs over 600 tests per hour. Alcoscan EBS010 is built for Industrial and High Security environments.
Annual calibration is recommended.
Specifications
Annual calibration is recommended.
Category | Contents |
Indication of B.A.C | 1) Pass is below 0.01% B.A.C. Fail can be set to fail from 0.01% B.A.C and up |
Accuracy | +/-0.005%BAC at 0.100%BAC |
Mouth piece | No Mouthpiece required |
Sensor | Replaceable fuel cell type alcohol sensor |
Power supply | 12VDC 1.5A power supply required – Supplied Standard |
Weight | 550g |
Dimension (mm) | 205 (height) X 108 (width) X 95 |
Remarks | Auto power off – Air flow rate checking for no blows – Calibrated to fail from 0.01% B.A.C to prevent access at the lowest possible BrAC levels – Pricing excludes installation costs – Time keeping and attendance technicians can easily install |